| <project |
| name="Build specific targets and properties" |
| default="runTest"> |
| <!-- |
| Note to be cross-platform, "environment variables" are only |
| appropriate for some variables, e.g. ones we set, since |
| properties are case sensitive, even if the environment variables |
| on your operating system are not, e.g. it will be ${env.Path} |
| not ${env.PATH} on Windows |
| --> |
| <property |
| environment="env"/> |
| <fail |
| message="testRoot must be set for this task" |
| unless="testRoot"/> |
| <!-- required to get proper value of dropinsFolder --> |
| <property |
| name="keyCfgFile" |
| value="${env.PROJECT_BUILDERS}/${projectname}/${env.RELENG}/maps/build.cfg"/> |
| <echo |
| level="info" |
| message="keyCfgFile: ${keyCfgFile}"/> |
| <property |
| file="${keyCfgFile}"/> |
| <!-- |
| typcially already set, but in case of standalone tests, may not |
| be |
| --> |
| <property |
| name="buildLabel" |
| value="${buildType}-${buildId}-${timestamp}"/> |
| |
| |
| <!-- |
| Steps to do after the build is done. |
| --> |
| <target |
| name="test"> |
| <dirname |
| file="${ant.file}" |
| property="currentDirectory"/> |
| <ant |
| antfile="${ant.file}" |
| target="runTest" |
| dir="${currentDirectory}"/> |
| </target> |
| |
| <!-- |
| Steps to do to test the build results |
| --> |
| <target |
| name="runTest"> |
| <dirname |
| file="${ant.file}" |
| property="test.component.dir"/> |
| <ant |
| antfile="${wtp.builder.home}/scripts/build/label.xml"/> |
| <property |
| file="${buildDirectory}/label.properties"/> |
| <property |
| file="${wtp.builder.home}/build.properties"/> |
| <fail |
| message="testRoot must be set for this task" |
| unless="testRoot"/> |
| <mkdir |
| dir="${testRoot}"/> |
| |
| <!-- if results already exist, delete them --> |
| <delete |
| dir="${testRoot}/results" |
| failOnError="false"/> |
| <mkdir |
| dir="${testRoot}/results"/> |
| <mkdir |
| dir="${testRoot}/results/consolelogs"/> |
| <copy |
| todir="${testRoot}" |
| overwrite="true"> |
| <fileset |
| dir="${test.component.dir}/testScripts"/> |
| </copy> |
| <echo |
| message="BASEOS: ${env.BASEOS} BASEWS: ${env.BASEWS} BASEARCH: ${env.BASEARCH} "/> |
| |
| <property |
| name="dependency.properties" |
| value="${buildDirectory}/maps/${env.RELENG}/${dependencyFileLocation}"/> |
| <available |
| file="${dependency.properties}" |
| property="dependency.properties.exists"/> |
| <fail |
| message="dependency file not found: ${dependency.properties}" |
| unless="dependency.properties.exists"/> |
| <property |
| name="test.dependency" |
| value="${buildDirectory}/maps/${env.RELENG}/${testdependencyFileLocation}"/> |
| <available |
| file="${test.dependency}" |
| property="test.dependency.exists"/> |
| <fail |
| message="test dependency file not found: ${test.dependency}" |
| unless="test.dependency.exists"/> |
| <ant |
| antfile="${test.dependency}" |
| target="get"> |
| <property |
| name="base.install.dir" |
| value="${testRoot}"/> |
| </ant> |
| <antcall |
| target="unzipTests"/> |
| <antcall |
| target="runTestEclipse"> |
| <param |
| name="testTarget" |
| value="all"/> |
| </antcall> |
| <antcall |
| target="postRunTestEclipse"> |
| <param |
| name="testTarget" |
| value="all"/> |
| </antcall> |
| </target> |
| <target |
| name="unzipTests"> |
| <!-- |
| unzip the builds and junit tests we use 'unzip' here, so we |
| can continue on error, if desired. (such as if zip was not |
| created, due to other failures or options). |
| --> |
| <java |
| taskname="p2Director Install" |
| fork="true" |
| resultProperty="p2DirectorInstallResult" |
| failonerror="true" |
| timeout="${testTimeLimit}" |
| dir="${testRoot}" |
| jvm="${env.JAVA_6_HOME}/bin/java" |
| classname="org.eclipse.equinox.launcher.Main"> |
| <classpath> |
| <fileset |
| dir="${testRoot}/eclipse/plugins"> |
| <include |
| name="org.eclipse.equinox.launcher_*.jar"/> |
| </fileset> |
| </classpath> |
| <jvmarg |
| value="-Djava.io.tmpdir=${env.RECOMMENDED_TMP_DIR}"/> |
| <arg |
| value="-nosplash"/> |
| <arg |
| value="-debug"/> |
| <arg |
| value="-consolelog"/> |
| <arg |
| value="-data"/> |
| <arg |
| value="${testRoot}/p2DirectorInstall"/> |
| <arg |
| value="-application"/> |
| <arg |
| value="org.eclipse.equinox.p2.director"/> |
| <arg |
| value="-destination"/> |
| <arg |
| value="${testRoot}/eclipse"/> |
| <arg |
| value="-profile"/> |
| <arg |
| value="SDKProfile"/> |
| <arg |
| value="-repository"/> |
| <arg |
| value="file://${buildDirectory}/${buildLabel}/repository/"/> |
| <arg |
| value="-installIU"/> |
| <arg |
| value="${wtpFeatureIUs},${testFeatureIUs}"/> |
| |
| <!-- make sure our forked env has a DISPLAY --> |
| <env |
| key="DISPLAY" |
| value="${env.DISPLAY}"/> |
| <redirector |
| output="${testRoot}/results/fullOutput.txt" |
| error="${testRoot}/results/fullErrorLog.txt"/> |
| <arg |
| value="-vmArgs"/> |
| <arg |
| value="-Declipse.p2.data.area=${testRoot}/eclipse/p2"/> |
| </java> |
| <echo |
| message="p2DirectorInstallResult: ${p2DirectorInstallResult}"/> |
| <!-- |
| <fail message="installation of tests failed" |
| if="p2DirectorInstallResult"/> |
| --> |
| </target> |
| <!-- |
| time out may need to be set/adjust for api or performance tests? |
| This testTimeLimit is the whole, overall limit on tests. There's |
| a shorter one for individual suites. some common values, of |
| milliseconds to more recognizable units: |
| 14400000: 4 hours |
| 7200000: 2 hours |
| 3600000: 1 hour |
| 1800000: 30 minutes |
| 600000: 10 minutes |
| --> |
| <property |
| name="testTimeLimit" |
| value="28800000"/> |
| <property |
| name="testFailOnError" |
| value="false"/> |
| <target |
| name="runTestEclipse" |
| description="Run our JUnit's within an instance of antRunner"> |
| <property |
| name="test-vm" |
| value="${env.JAVA_6_HOME}/bin/java"/> |
| <!-- |
| set path to eclipse folder. If local folder, use '.'; |
| otherwise, use c:\path\to\eclipse or /path/to/eclipse/ |
| --> |
| <property |
| name="eclipse.home" |
| value="${testRoot}"/> |
| <echo |
| message="testTarget: ${testTarget}"/> |
| <!-- |
| can not pass in empty values in jvmargs so if not testBundle |
| specified, we'll pass a junk (unused) value |
| --> |
| <condition |
| property="testBundleParam" |
| value="-DtestBundle=${testBundle}" |
| else="-Dunused=nouse"> |
| <isset |
| property="testBundle"/> |
| </condition> |
| <echo |
| message="Running junits"/> |
| <!-- |
| If there is not exactly one launcher in the stack, we'd best |
| fail fast, since we are not expecting that, and may indicate |
| an installation that would produce unpredictable results |
| --> |
| <!-- |
| requires ant 1.7, and at this point, we're running 1.6 from |
| eclipse ... <condition property="expectedNumberOfLaunchers"> |
| <resourcecount when="equal" count="1" > <fileset |
| dir="${testRoot}/eclipse/plugins"> <include |
| name="org.eclipse.equinox.launcher_*.jar" /> </fileset> |
| </resourcecount> </condition> <fail message="Did not find |
| expected number of launcher jars. Check installation." |
| unless="expectedNumberOfLaunchers" /> |
| --> |
| <!-- |
| Remember: using dash 'debug' for org.eclipse.ant.core.antRunner |
| produces ant debug info to be output ... which is a TON of |
| stuff. Even 'verbose' is a bit too much. |
| --> |
| <echo |
| message="eclipse.launcher: ${eclipse.launcher}"/> |
| <java |
| taskname="unit-test-masterprocess" |
| fork="true" |
| resultProperty="wtpmasterjunitresult" |
| failonerror="false" |
| timeout="${testTimeLimit}" |
| dir="${testRoot}/eclipse" |
| jvm="${env.JAVA_6_HOME}/bin/java" |
| classname="org.eclipse.equinox.launcher.Main"> |
| <classpath> |
| <fileset |
| dir="${testRoot}/eclipse/plugins"> |
| <include |
| name="org.eclipse.equinox.launcher_*.jar"/> |
| </fileset> |
| </classpath> |
| <jvmarg |
| value="-Dosgi.ws=${env.BASEWS}"/> |
| <jvmarg |
| value="-Dosgi.os=${env.BASEOS}"/> |
| <jvmarg |
| value="-Dosgi.arch=${env.BASEARCH}"/> |
| <jvmarg |
| value="-Dws=${env.BASEWS}"/> |
| <jvmarg |
| value="-Dos=${env.BASEOS}"/> |
| <jvmarg |
| value="-Darch=${env.BASEARCH}"/> |
| <jvmarg |
| value="-DbuildBranch=${buildBranch}"/> |
| <jvmarg |
| value="-DbuildType=${buildType}"/><jvmarg value="-DdependencyFileLocation=${dependencyFileLocation}"/> <jvmarg value="-DtestdependencyFileLocation=${testdependencyFileLocation}"/> |
| <jvmarg |
| value="-DbuildId=${buildId}"/> |
| <jvmarg |
| value="-Dprojectname=${projectname}"/> |
| <jvmarg |
| value="-Djava.io.tmpdir=${env.RECOMMENDED_TMP_DIR}"/> |
| <jvmarg |
| value="${testBundleParam}"/> |
| <arg |
| value="-nosplash"/> |
| <arg |
| value="-consolelog"/> |
| <arg |
| value="-data"/> |
| <arg |
| value="${testRoot}/overallTestWorkspace"/> |
| <arg |
| value="-application"/> |
| <arg |
| value="org.eclipse.ant.core.antRunner"/> |
| <arg |
| value="-logger"/> |
| <arg |
| value="org.apache.tools.ant.DefaultLogger"/> |
| <arg |
| value="-file"/> |
| <arg |
| value="${testRoot}/test.xml"/> |
| <arg |
| value="${testTarget}"/> |
| |
| <!-- make sure our forked env has a DISPLAY --> |
| <env |
| key="DISPLAY" |
| value="${env.DISPLAY}"/> |
| <redirector |
| output="${testRoot}/results/fullOutput.txt" |
| error="${testRoot}/results/fullErrorLog.txt"/> |
| <jvmarg |
| value="-Dbuild.home=${env.BUILD_HOME}"/> |
| <jvmarg |
| value="-DbuildDirectory=${buildDirectory}"/> |
| <jvmarg |
| value="-DbuildLabel=${buildLabel}"/> |
| <jvmarg |
| value="-DbaseLocation=${baseLocation}"/> |
| <jvmarg |
| value="-DtestRoot=${testRoot}"/> |
| <jvmarg |
| value="-DtestDir=${testRoot}"/> |
| <jvmarg |
| value="-DeclipseBuilderDirectory=${pde.builder.path}"/> |
| <!-- |
| <!- - IBM_JAVA_OPTIONS contains JIT work arounds for bug |
| 284441 - -> <env key="IBM_JAVA_OPTIONS" |
| value="-Xjit:{org/eclipse/wst/html/core/internal/contenttype/HTMLHeadTokenizer.primGetNextToken()Ljava/lang/String;}(disableLookahead),{org/eclipse/jst/jsp/core/internal/parser/internal/JSPTokenizer.primGetNextToken()Ljava/lang/String;}(disableLookahead)"/> |
| --> |
| </java> |
| <echo |
| message="wtpmasterjunitresult ${wtpmasterjunitresult}"/> |
| </target> |
| <target |
| name="postRunTestEclipse"> |
| <copy |
| todir="${buildDirectory}/${buildLabel}/testResults/consolelogs/testLogs" |
| overwrite="true" |
| failonerror="false"> |
| <fileset |
| dir="${testRoot}/results"> |
| <include |
| name="*output.txt"/> |
| </fileset> |
| </copy> |
| <copy |
| todir="${buildDirectory}/${buildLabel}/testResults/consolelogs/testSysErrorLogs" |
| overwrite="true" |
| failonerror="false"> |
| <fileset |
| dir="${testRoot}/results"> |
| <include |
| name="*error.txt"/> |
| </fileset> |
| </copy> |
| <copy |
| file="${testRoot}/results/fullOutput.txt" |
| toDir="${buildDirectory}/${buildLabel}/testResults/consolelogs/full" |
| overwrite="true" |
| failonerror="false"> |
| </copy> |
| <copy |
| file="${testRoot}/results/fullErrorLog.txt" |
| toDir="${buildDirectory}/${buildLabel}/testResults/consolelogs/full" |
| overwrite="true" |
| failonerror="false"> |
| </copy> |
| <copy |
| todir="${buildDirectory}/${buildLabel}/testResults/xml" |
| overwrite="true" |
| failonerror="false"> |
| <fileset |
| dir="${testRoot}/results/xml"> |
| <include |
| name="*.xml"/> |
| </fileset> |
| </copy> |
| <copy |
| todir="${buildDirectory}/${buildLabel}/testResults/html" |
| overwrite="true" |
| failonerror="false"> |
| <fileset |
| dir="${testRoot}/results/html"> |
| <include |
| name="*.html"/> |
| </fileset> |
| </copy> |
| <copy |
| todir="${buildDirectory}/${buildLabel}/testResults/" |
| overwrite="true" |
| failonerror="false"> |
| <fileset |
| dir="${testRoot}/results/"> |
| <include |
| name="*.html"/> |
| </fileset> |
| </copy> |
| </target> |
| </project> |