| <project |
| name="Build specific targets and properties" |
| default="runTest"> |
| <!-- |
| Note to be cross-platform, "environment variables" are only |
| appropriate for some variables, e.g. ones we set, since |
| properties are case sensitive, even if the environment variables |
| on your operating system are not, e.g. it will be ${env.Path} |
| not ${env.PATH} on Windows |
| --> |
| <property environment="env"/> |
| <fail |
| message="testRoot must be set for this task" |
| unless="testRoot"/> |
| <!-- required to get proper value of branch specific values --> |
| <property |
| name="keyCfgFile" |
| value="${env.PROJECT_BUILDERS}/${projectname}/${env.RELENG}/maps/build.cfg"/> |
| <echo |
| level="debug" |
| message="keyCfgFile: ${keyCfgFile}"/> |
| <property file="${keyCfgFile}"/> |
| <!-- |
| typcially already set, but in case of standalone tests, may not |
| be |
| --> |
| <property |
| name="buildLabel" |
| value="${buildType}-${buildId}-${timestamp}"/> |
| |
| |
| <!-- |
| Steps to do after the build is done. |
| --> |
| <target name="test"> |
| <dirname |
| file="${ant.file}" |
| property="currentDirectory"/> |
| <ant |
| antfile="${ant.file}" |
| target="runTest" |
| dir="${currentDirectory}"/> |
| </target> |
| |
| <!-- |
| Steps to do to test the build results |
| --> |
| <target name="runTest"> |
| <dirname |
| file="${ant.file}" |
| property="test.component.dir"/> |
| <ant antfile="${wtp.builder.home}/scripts/build/label.xml"/> |
| <property file="${buildDirectory}/label.properties"/> |
| <property file="${wtp.builder.home}/build.properties"/> |
| <fail |
| message="testRoot must be set for this task" |
| unless="testRoot"/> |
| <mkdir dir="${testRoot}"/> |
| |
| <!-- if results already exist, delete them --> |
| <delete |
| quiet="true" |
| dir="${testRoot}/results" |
| failOnError="false"/> |
| <mkdir dir="${testRoot}/results"/> |
| <mkdir dir="${testRoot}/results/consolelogs"/> |
| <copy |
| todir="${testRoot}" |
| overwrite="true"> |
| <fileset dir="${test.component.dir}/testScripts"/> |
| </copy> |
| <echo level="debug" message="BASEOS: ${env.BASEOS} BASEWS: ${env.BASEWS} BASEARCH: ${env.BASEARCH} "/> |
| |
| <property |
| name="dependency.properties" |
| value="${buildDirectory}/maps/${env.RELENG}/${dependencyFileLocation}"/> |
| <available |
| file="${dependency.properties}" |
| property="dependency.properties.exists"/> |
| <fail |
| message="dependency file not found: ${dependency.properties}" |
| unless="dependency.properties.exists"/> |
| <property |
| name="test.dependency" |
| value="${wtp.builder.home}/scripts/dependency/dependency.xml"/> |
| <available |
| file="${test.dependency}" |
| property="test.dependency.exists"/> |
| <fail |
| message="test dependency file not found: ${test.dependency}" |
| unless="test.dependency.exists"/> |
| <echo level="debug" message="test.dependency file: ${test.dependency}"/> |
| <ant |
| antfile="${test.dependency}" |
| target="get"> |
| <property |
| name="base.install.dir" |
| value="${testRoot}"/> |
| <property |
| name="tobeinstalled.properties" |
| value="${buildDirectory}/maps/${env.RELENG}/distribution/${build.distribution}.tests/tobeInstalled.properties"/> |
| |
| <property |
| name="installWorkingDirectory" |
| value="${testRoot}"/> |
| |
| |
| |
| </ant> |
| <antcall target="installTests"/> |
| <antcall target="runTestEclipse"> |
| <param |
| name="testTarget" |
| value="all"/> |
| </antcall> |
| <antcall target="postRunTestEclipse"> |
| <param |
| name="testTarget" |
| value="all"/> |
| </antcall> |
| </target> |
| |
| <!-- |
| note: the 'test.installed' attribute is a temporary hack |
| to allow standalone tests to do the install themselves. |
| Eventually, this script should be improved so this hack would |
| be not required. The "location" of the |
| zips/repos are indirectly currently "hard coded" to |
| be in /projects/... but |
| this should become a variable, sometimes (maybe) |
| set to /projects/..., |
| more often set to some URL from committers or downloads pages. |
| See the repos values below in repo install: |
| value="file://${buildDirectory}/${buildLabel}/repository/,file://${buildDirectory}/${buildLabel}/repositoryunittests/"/> |
| These should be changed to be something like |
| value="${coderepo},${unittestsrepo}"/> |
| Or similar. Then could be set as desired. |
| --> |
| <target |
| name="installTests" |
| unless="test.installed"> |
| |
| |
| <antcall target="installTestsFromRepo"> |
| </antcall> |
| |
| |
| </target> |
| |
| <target |
| name="installTestsFromZips" |
| depends="init"> |
| |
| <!-- a bit hard coded here, will need work for general case --> |
| <property |
| name="zipFile" |
| value="${compName}-${buildLabel}.zip"/> |
| |
| |
| <!-- |
| We use the exec method for unzip, so we won't fail if a |
| prereq can not be unzipped for some reason. See |
| https://bugs.eclipse.org/bugs/show_bug.cgi?id=283968 |
| --> |
| <mkdir dir="${install.destination}"/> |
| <exec |
| dir="." |
| executable="unzip"> |
| <arg line="-o -qq ${buildDirectory}/${buildLabel}/${zipFile} -d ${install.destination}/${compName}"/> |
| </exec> |
| |
| </target> |
| |
| <target name="installTestsFromRepo"> |
| |
| <java |
| taskname="p2Director Install" |
| fork="true" |
| resultProperty="p2DirectorInstallResult" |
| failonerror="false" |
| timeout="${testTimeLimit}" |
| dir="${testRoot}" |
| jvm="${env.JAVA_6_HOME}/bin/java" |
| classname="org.eclipse.equinox.launcher.Main"> |
| <classpath> |
| <fileset dir="${testRoot}/eclipse/plugins"> |
| <include name="org.eclipse.equinox.launcher_*.jar"/> |
| </fileset> |
| </classpath> |
| <jvmarg value="-Djava.io.tmpdir=${env.RECOMMENDED_TMP_DIR}"/> |
| <jvmarg value="-Dwtp.builder.home=${wtp.builder.home}"/> |
| <jvmarg value="-Dbuild.distribution=${build.distribution}"/> |
| <arg value="-nosplash"/> |
| <arg value="-debug"/> |
| <arg value="-consolelog"/> |
| <arg value="-data"/> |
| <arg value="${testRoot}/p2DirectorInstall"/> |
| <arg value="-application"/> |
| <arg value="org.eclipse.equinox.p2.director"/> |
| <arg value="-destination"/> |
| <arg value="${testRoot}/eclipse"/> |
| |
| <arg value="-repository"/> |
| <arg value="file://${buildDirectory}/${buildLabel}/repository/"/> |
| <!-- |
| <arg value="file://${buildDirectory}/${buildLabel}/repository/,file://${buildDirectory}/${buildLabel}/repositoryunittests/"/> |
| --> |
| <arg value="-installIU"/> |
| <arg value="${wtpFeatureIUs},${testFeatureIUs}"/> |
| |
| <!-- make sure our forked env has a DISPLAY --> |
| <env |
| key="DISPLAY" |
| value="${env.DISPLAY}"/> |
| <redirector |
| output="${testRoot}/results/fullOutput.txt" |
| error="${testRoot}/results/fullErrorLog.txt"/> |
| |
| </java> |
| <!-- If the task succeeds, this ouput log won't be that relevent ... (can be make better in future ... but for now we'll make a copy, |
| just in case we need it --> |
| <echo level="debug" message="p2DirectorInstallResult: ${p2DirectorInstallResult}"/> |
| |
| <condition property="p2DirectorInstallFailed"> |
| <not> |
| <equals |
| arg1="0" |
| arg2="${p2DirectorInstallResult}"/> |
| </not> |
| </condition> |
| |
| <!-- always copy to test results, even when successful --> |
| <copy |
| file="${testRoot}/results/fullOutput.txt" |
| tofile="${buildDirectory}/${buildLabel}/testResults/p2DirectorInstall.log.txt" |
| overwrite="false" |
| failonerror="false"> |
| </copy> |
| |
| <antcall target="handleFailedInstall"/> |
| |
| |
| </target> |
| <target |
| name="handleFailedInstall" |
| if="p2DirectorInstallFailed"> |
| |
| <!-- copy to direct location, as a signal (to web pages) it failed and link should be provided --> |
| <copy |
| file="${testRoot}/results/fullOutput.txt" |
| tofile="${buildDirectory}/${buildLabel}/p2DirectorInstall.log.txt" |
| overwrite="false" |
| failonerror="false"> |
| </copy> |
| |
| <fail |
| message="installation of tests failed. See p2DirectorInstall.log.txt." |
| if="p2DirectorInstallResult"/> |
| |
| </target> |
| <!-- |
| time out may need to be set/adjust for api or performance tests? |
| This testTimeLimit is the whole, overall limit on tests. There's |
| a shorter one for individual suites. some common values, of |
| milliseconds to more recognizable units: |
| 14400000: 4 hours |
| 7200000: 2 hours |
| 3600000: 1 hour |
| 1800000: 30 minutes |
| 600000: 10 minutes |
| --> |
| <property |
| name="testTimeLimit" |
| value="28800000"/> |
| <property |
| name="testFailOnError" |
| value="false"/> |
| <target |
| name="runTestEclipse" |
| description="Run our JUnit's within an instance of antRunner"> |
| <property |
| name="test-vm" |
| value="${env.JAVA_6_HOME}/bin/java"/> |
| <!-- |
| set path to eclipse folder. If local folder, use '.'; |
| otherwise, use c:\path\to\eclipse or /path/to/eclipse/ |
| --> |
| <property |
| name="eclipse.home" |
| value="${testRoot}"/> |
| <echo level="debug" message="testTarget: ${testTarget}"/> |
| <!-- |
| can not pass in empty values in jvmargs so if not testBundle |
| specified, we'll pass a junk (unused) value |
| --> |
| <condition |
| property="testBundleParam" |
| value="-DtestBundle=${testBundle}" |
| else="-Dunused=nouse"> |
| <isset property="testBundle"/> |
| </condition> |
| <echo message="Running junits"/> |
| <!-- |
| If there is not exactly one launcher in the stack, we'd best |
| fail fast, since we are not expecting that, and may indicate |
| an installation that would produce unpredictable results |
| --> |
| <!-- |
| requires ant 1.7, and at this point, we're running 1.6 from |
| eclipse ... <condition property="expectedNumberOfLaunchers"> |
| <resourcecount when="equal" count="1" > <fileset |
| dir="${testRoot}/eclipse/plugins"> <include |
| name="org.eclipse.equinox.launcher_*.jar" /> </fileset> |
| </resourcecount> </condition> <fail message="Did not find |
| expected number of launcher jars. Check installation." |
| unless="expectedNumberOfLaunchers" /> |
| --> |
| |
| <condition |
| property="antQuietValue" |
| value="-quiet" |
| else=""> |
| <istrue value="${env.USE_QUIET}"/> |
| </condition> |
| <java |
| taskname="unit-test-masterprocess" |
| fork="true" |
| resultProperty="wtpmasterjunitresult" |
| failonerror="false" |
| timeout="${testTimeLimit}" |
| dir="${testRoot}/eclipse" |
| jvm="${env.JAVA_6_HOME}/bin/java" |
| classname="org.eclipse.equinox.launcher.Main"> |
| <classpath> |
| <fileset dir="${testRoot}/eclipse/plugins"> |
| <include name="org.eclipse.equinox.launcher_*.jar"/> |
| </fileset> |
| </classpath> |
| <jvmarg value="-Dosgi.ws=${env.BASEWS}"/> |
| <jvmarg value="-Dosgi.os=${env.BASEOS}"/> |
| <jvmarg value="-Dosgi.arch=${env.BASEARCH}"/> |
| <jvmarg value="-Dws=${env.BASEWS}"/> |
| <jvmarg value="-Dos=${env.BASEOS}"/> |
| <jvmarg value="-Darch=${env.BASEARCH}"/> |
| <jvmarg value="-DbuildBranch=${buildBranch}"/> |
| <jvmarg value="-DbuildType=${buildType}"/> |
| <jvmarg value="-DdependencyFileLocation=${dependencyFileLocation}"/> |
| <jvmarg value="-DbuildId=${buildId}"/> |
| <jvmarg value="-Dprojectname=${projectname}"/> |
| <jvmarg value="-Djava.io.tmpdir=${env.RECOMMENDED_TMP_DIR}"/> |
| <jvmarg value="-Dwtp.builder.home=${wtp.builder.home}"/> |
| <jvmarg value="-Dbuild.distribution=${build.distribution}"/> |
| <jvmarg value="${testBundleParam}"/> |
| <arg value="-nosplash"/> |
| <arg value="-consolelog"/> |
| <arg value="-data"/> |
| <arg value="${testRoot}/overallTestWorkspace"/> |
| <arg value="-application"/> |
| <arg value="org.eclipse.ant.core.antRunner"/> |
| <arg value="${antQuietValue}"/> |
| <arg value="-logger"/> |
| <arg value="org.apache.tools.ant.DefaultLogger"/> |
| <arg value="-file"/> |
| <arg value="${testRoot}/test.xml"/> |
| <arg value="${testTarget}"/> |
| |
| <!-- make sure our forked env has a DISPLAY --> |
| <env |
| key="DISPLAY" |
| value="${env.DISPLAY}"/> |
| <redirector |
| output="${testRoot}/results/fullOutput.txt" |
| error="${testRoot}/results/fullErrorLog.txt"/> |
| <jvmarg value="-Dbuild.home=${env.BUILD_HOME}"/> |
| <jvmarg value="-DbuildDirectory=${buildDirectory}"/> |
| <jvmarg value="-DbuildLabel=${buildLabel}"/> |
| <jvmarg value="-DbaseLocation=${baseLocation}"/> |
| <jvmarg value="-DtestRoot=${testRoot}"/> |
| <jvmarg value="-DtestDir=${testRoot}"/> |
| <jvmarg value="-DeclipseBuilderDirectory=${pde.builder.path}"/> |
| <!-- |
| <!- - IBM_JAVA_OPTIONS contains JIT work arounds for bug |
| 284441 - -> <env key="IBM_JAVA_OPTIONS" |
| value="-Xjit:{org/eclipse/wst/html/core/internal/contenttype/HTMLHeadTokenizer.primGetNextToken()Ljava/lang/String;}(disableLookahead),{org/eclipse/jst/jsp/core/internal/parser/internal/JSPTokenizer.primGetNextToken()Ljava/lang/String;}(disableLookahead)"/> |
| --> |
| </java> |
| <echo message="wtpmasterjunitresult ${wtpmasterjunitresult}"/> |
| </target> |
| <target name="postRunTestEclipse"> |
| <copy |
| todir="${buildDirectory}/${buildLabel}/testResults/consolelogs/testLogs" |
| overwrite="true" |
| failonerror="false"> |
| <fileset dir="${testRoot}/results"> |
| <include name="*output.txt"/> |
| </fileset> |
| </copy> |
| <copy |
| todir="${buildDirectory}/${buildLabel}/testResults/consolelogs/testSysErrorLogs" |
| overwrite="true" |
| failonerror="false"> |
| <fileset dir="${testRoot}/results"> |
| <include name="*error.txt"/> |
| </fileset> |
| </copy> |
| <copy |
| file="${testRoot}/results/fullOutput.txt" |
| toDir="${buildDirectory}/${buildLabel}/testResults/consolelogs/full" |
| overwrite="true" |
| failonerror="false"> |
| </copy> |
| <copy |
| file="${testRoot}/results/fullErrorLog.txt" |
| toDir="${buildDirectory}/${buildLabel}/testResults/consolelogs/full" |
| overwrite="true" |
| failonerror="false"> |
| </copy> |
| <copy |
| todir="${buildDirectory}/${buildLabel}/testResults/xml" |
| overwrite="true" |
| failonerror="false"> |
| <fileset dir="${testRoot}/results/xml"> |
| <include name="*.xml"/> |
| </fileset> |
| </copy> |
| <copy |
| todir="${buildDirectory}/${buildLabel}/testResults/html" |
| overwrite="true" |
| failonerror="false"> |
| <fileset dir="${testRoot}/results/html"> |
| <include name="*.html"/> |
| </fileset> |
| </copy> |
| <copy |
| todir="${buildDirectory}/${buildLabel}/testResults/" |
| overwrite="true" |
| failonerror="false"> |
| <fileset dir="${testRoot}/results/"> |
| <include name="*.html"/> |
| </fileset> |
| </copy> |
| </target> |
| |
| <target name="init"> |
| |
| <echo level="debug" message="dropinsFolder: ${dropinsFolder} "/> |
| <condition |
| property="install.destination" |
| value="${testRoot}${dropinsFolder}/" |
| else="${testRoot}/eclipse"> |
| <isset property="dropinsFolder"/> |
| </condition> |
| |
| </target> |
| |
| </project> |