############################################################################### # Copyright (c) 2000, 2005 IBM Corporation and others. # All rights reserved. This program and the accompanying materials # are made available under the terms of the Eclipse Public License v1.0 # which accompanies this distribution, and is available at # http://www.eclipse.org/legal/epl-v10.html # # Contributors: # IBM Corporation - initial API and implementation ############################################################################### PasswordManagementPreferencePage.2=When you create a CVS repository location you have the option of saving the password to disk. This page allows you to manage the stored passwords. The following CVS repository locations have saved passwords: PasswordManagementPreferencePage.3=Location PasswordManagementPreferencePage.4=Username PasswordManagementPreferencePage.5=&Remove PasswordManagementPreferencePage.6=Remove &All UserValidationDialog.5=CVS Repository: UserValidationDialog.6=&Save Password UserValidationDialog.7=Saved passwords are stored on your computer in a file that's difficult, but not impossible, for an intruder to read. details=Press the details button for more information. simpleInternal=Internal error internal=An internal error has occurred, consult the error log for details. yes=Yes no=No information=Server Information exception=Server Exception confirmOverwriteTitle=Confirm Overwrite Project confirmOverwrite=The project already exists in the workspace. Its contents will be overwritten. question=Question localChanges=You have local changes which you are about to overwrite. Do you wish to continue? error=Error cvs=CVS notAvailable=Not Available buildError=A build error occurred after the CVS operation completed. ok=OK separator=/ nameAndRevision={0} {1} currentRevision=*{0} AddAction.addFailed=Error occurred during Add AddAction.adding=Adding... AddAction.addIgnoredTitle=Add Ignored Resource? AddAction.addIgnoredQuestion=You have explicitly asked to version control one or more resources that otherwise would have been ignored. Continue? AddToVersionControlDialog.title=Add to CVS Version Control AddToVersionControlDialog.thereIsAnUnaddedResource=There is {0} resource that is not under CVS version control. Do you want to add it? AddToVersionControlDialog.thereAreUnaddedResources=There are {0} resources that are not under CVS version control. Do you want to add them? CheckoutAction.overlappingModuleExpansions=You have attempted to check out multiple remote modules that expand to the same local resource ''{0}''. AutoDefineTagsAction.defineTags = Auto-discover tags AvoidableMessageDialog.dontShowAgain=Don't show this again BranchWizard.title=Create a new CVS Branch BranchWizard.errorBranching=Error Branching Resources BranchWizardPage.pageDescription=Creates a new branch and a starting point version. BranchWizardPage.pageDescriptionVersion=Creates a new branch based on the version in the workspace. BranchWizardPage.specifyVersion=The version will provide a starting point for merging the branch back to the source branch. BranchWizardPage.branchName=&Branch Name: BranchWizardPage.versionName=&Version Name: BranchWizardPage.startWorking=Start &working in the branch BranchWizardPage.versionPrefix=Root_ BranchWizard.versionNameWarning=Version name: {0} BranchWizard.branchNameWarning=Branch name: {0} BranchWizard.branchAndVersionMustBeDifferent=The branch name and version name must be different. BranchWizard.branchNameAlreadyExists=Branch name already exists. BranchWizard.versionNameAlreadyExists=Version name already exists. BranchWizardPage.existingVersionsAndBranches=E&xisting Versions and Branches ConsolePreferencePage.consoleColorSettings=Console text color settings: ConsolePreferencePage.commandColor=Command &Line: ConsolePreferencePage.messageColor=&Message: ConsolePreferencePage.errorColor=E&rror: ConsolePreferencePage.font=Console font setting: CVSAction.errorTitle=Errors occurred CVSAction.warningTitle=Warnings occurred CVSAction.multipleProblemsMessage=Multiple problems occurred: CVSAction.mixingTagsTitle=Confirm Mixing Tags CVSAction.mixingTags=You are mixing tags within a project. Beware that synchronization uses the tag information associated with each resource to determine the remote resource with which the local resource is compared. \n\nThis means that the part(s) of your project that you are replacing with another tag will be synchronized with the tag ''{0}'' while other resources in the project will be synchronized with another tag. \n\nDo you wish to continue? CVSAction.handlerNotEnabledTitle=Warning CVSAction.handlerNotEnabledMessage=The action doesn't apply to the current selection. CVSAnnotateView.showFileAnnotation=CVS Annotate - {0} CVSAnnotateView.viewInstructions=This view shows annotations for a file in CVS. Select a file and then choose \"Team->Show Annotation\" from the context menu. ShowAnnotationAction.noSyncInfo=Cannot display annotation for {0} because it doesn''t have a remote revision. ShowAnnotationOperation.taskName=Fetching annotations from repository ShowAnnotationOperation.0=Error opening perspective ShowAnnotationOperation.1=Confirm Perspective Switch ShowAnnotationOperation.2=The CVS Annotate View is associated with the {0} perspective. Do you want to switch to that perspective now? ShowAnnotationOperation.4=&Remember my decision CVSCatchupReleaseViewer.commit=&Commit... CVSCatchupReleaseViewer.update=&Update from Repository CVSCatchupReleaseViewer.forceCommit=Override and Co&mmit... CVSCatchupReleaseViewer.forceUpdate=Override and U&pdate CVSCatchupReleaseViewer.ignore=A&dd to .cvsignore CVSCatchupReleaseViewer.mergeUpdate=&Merge Changes into Local Copy CVSCatchupReleaseViewer.commonFile=Common file: {0} CVSCatchupReleaseViewer.commonFileRevision=Common file: {0} {1} CVSCatchupReleaseViewer.noCommonFile=No common file CVSCatchupReleaseViewer.noRepositoryFile=No repository file CVSCatchupReleaseViewer.repositoryFile=Repository file: {0} CVSCatchupReleaseViewer.repositoryFileRevision=Repository file: {0} {1} [{2}] CVSCatchupReleaseViewer.workspaceFile=Workspace file: {0} CVSCatchupReleaseViewer.showInHistory=Show in &Resource History CVSCatchupReleaseViewer.fileDecoration={0} ({1}) CVSCatchupReleaseViewer.folderDecoration={0} {1} CVSCatchupReleaseViewer.confirmMerge=Mark as Mer&ged CVSCatchupReleaseViewer.addAction=&Add to Version Control CVSCatchupReleaseViewer.labelWithSyncKind={0} {1} CVSCompareEditorInput.branchLabel= CVSCompareEditorInput.headLabel= CVSCompareEditorInput.comparing=Comparing... CVSCompareEditorInput.different=Cannot compare resources of different kind. CVSCompareEditorInput.inBranch={0} in {1} CVSCompareEditorInput.inHead={0} in HEAD CVSCompareEditorInput.0=File is new CVSCompareEditorInput.1=File has been deleted CVSCompareEditorInput.repository=Repository: {0} {1} CVSCompareEditorInput.titleAncestor=Compare {0} {1}-{2} and {3} CVSCompareEditorInput.titleNoAncestor=Compare {0} {1} and {2} CVSCompareEditorInput.titleNoAncestorDifferent=Compare {0} {1} and {2} {3} CVSCompareEditorInput.workspace=Workspace: {0} CVSCompareEditorInput.workspaceLabel= CVSCompareEditorInput.noWorkspaceFile=No workspace file CVSCompareEditorInput.noRepositoryFile=No repository file CVSCompareRevisionsInput.addToWorkspace=Get CVSCompareRevisionsInput.compareResourceAndVersions=Revisions of ''{0}'' CVSCompareRevisionsInput.errorReplacingTitle=Unable to Replace CVSCompareRevisionsInput.errorReplacingMessage=Resource(s) could not be loaded. A communication error may have occurred, or \ the resource(s) may not exist on the server, or you may \ not have permission to access them. CVSCompareRevisionsInput.repository=Repository file: {0} CVSCompareRevisionsInput.structureCompare=Structure Compare CVSCompareRevisionsInput.workspace=Workspace file: {0} CVSCompareRevisionsInput.truncate={0}[...] CVSDecorator.projectDecoration={0} [{1}] CVSDecoratorPreferencesPage.0=Select the &variables to add to the decoration format: CVSDecoratorPreferencesPage.1=Add Variables CVSDecoratorPreferencesPage.2=O&utgoing changes CVSDecoratorPreferencesPage.3=Re&mote resources CVSDecoratorPreferencesPage.4=Added &resources CVSDecoratorPreferencesPage.5=&New resources CVSDecoratorPreferencesPage.6=I&con Decorations CVSDecoratorPreferencesPage.7=File &Decoration: CVSDecoratorPreferencesPage.8=Add &Variables... CVSDecoratorPreferencesPage.9=F&older Decoration: CVSDecoratorPreferencesPage.10=Add Varia&bles... CVSDecoratorPreferencesPage.11=&Project Decoration: CVSDecoratorPreferencesPage.12=Add Variable&s... CVSDecoratorPreferencesPage.13=Di&rty flag: CVSDecoratorPreferencesPage.14=Added f&lag: CVSDecoratorPreferencesPage.15=Te&xt Decorations CVSDecoratorPreferencesPage.16=C&ompute deep outgoing state for folders CVSDecoratorPreferencesPage.17=Disabling this will improve decorator performance. CVSDecoratorPreferencesPage.18=Enable &font and color decorations CVSDecoratorPreferencesPage.19=org.eclipse.ui.preferencePages.ColorsAndFonts CVSDecoratorPreferencesPage.20=See ''{0}'' to configure the font and color decorations. CVSDecoratorPreferencesPage.21=&General CVSDecoratorPreferencesPage.22=name of the resource being decorated CVSDecoratorPreferencesPage.23=the tag applied to the resource CVSDecoratorPreferencesPage.24=keyword subsitution rule for the resource CVSDecoratorPreferencesPage.25=last revision loaded into workspace CVSDecoratorPreferencesPage.26=flag indicating that the file has outgoing changes CVSDecoratorPreferencesPage.27=flag indicating that the file has been added to the server CVSDecoratorPreferencesPage.28=name of the resource being decorated CVSDecoratorPreferencesPage.29=the tag applied to the resource (version, branch, or date) CVSDecoratorPreferencesPage.30=the repository location's hostname CVSDecoratorPreferencesPage.31=the connection method (e.g. pserver, ssh) CVSDecoratorPreferencesPage.32=user name for the connection CVSDecoratorPreferencesPage.33=repository home directory on server CVSDecoratorPreferencesPage.34=root relative directory CVSDecoratorPreferencesPage.35=flag indicating that the folder has a child resource with outgoing changes CVSDecorator.projectDecorationWithTag={0} [{1} {2}] CVSDecorator.fileDecorationWithTag={0} [{1}:{2}] CVSDecorator.fileDecorationNoTag={0} [{1}] CVSDecorator.folderDecoration={0} [{1}] CVSFilePropertiesPage.ignored=The file is ignored by CVS. CVSFilePropertiesPage.notManaged=The file is not managed by CVS. CVSFilePropertiesPage.isAdded=This file has been added to CVS control but has not been committed CVSFilePropertiesPage.baseRevision=Base revision: CVSFilePropertiesPage.baseTimestamp=Base timestamp: CVSFilePropertiesPage.dirty=Dirty: CVSFilePropertiesPage.modified=Modified: CVSFilePropertiesPage.keywordMode=Keyword mode: CVSFilePropertiesPage.tag=Tag: CVSFilePropertiesPage.none=HEAD CVSFilePropertiesPage.version={0} (Version) CVSFilePropertiesPage.branch={0} (Branch) CVSFilePropertiesPage.date={0} (Date) CVSFilePropertiesPage.error=An error occurred while creating this page. CVSFilePropertiesPage.permissions=Permissions: CVSFilePropertiesPage.notAvailable=Not Available CVSFolderPropertiesPage.ignored=The folder is ignored by CVS. CVSFolderPropertiesPage.notManaged=The folder is not managed by CVS. CVSFolderPropertiesPage.notCVSFolder=This folder has lost its CVS sharing information. CVSFolderPropertiesPage.root=Repository root: CVSFolderPropertiesPage.repository=Repository path: CVSFolderPropertiesPage.static=Static: CVSFolderPropertiesPage.disconnect=&Disconnect... CVSFolderPropertiesPage.disconnectTitle=Disconnect folder? CVSFolderPropertiesPage.disconnectQuestion=Disconnecting the folder from CVS control will delete the CVS synchronization information for the folder. Are you sure you want to disconnect? CVSLocalCompareEditorInput.title=CVS Compare [{0}] CVSOperationCancelledException.operationCancelled=Operation Cancelled CVSPropertiesPage.connectionType=&Connection type: CVSPropertiesPage.user=&User: CVSPropertiesPage.password=&Password: CVSPropertiesPage.host=&Host: CVSPropertiesPage.port=Port: CVSPropertiesPage.path=Repository p&ath: CVSPropertiesPage.module=Module: CVSPropertiesPage.defaultPort=Default CVSPropertiesPage.tag=Tag: CVSPreferencesPage.0=0 (disabled) CVSPreferencesPage.1=1 CVSPreferencesPage.2=2 CVSPreferencesPage.3=3 CVSPreferencesPage.4=4 CVSPreferencesPage.5=5 CVSPreferencesPage.6=6 CVSPreferencesPage.7=7 CVSPreferencesPage.8=8 CVSPreferencesPage.9=9 (highest compression) CVSPreferencesPage.10=None CVSPreferencesPage.11=Yes CVSPreferencesPage.12=No CVSPreferencesPage.13=Prompt CVSPreferencesPage.14=&General CVSPreferencesPage.15=&Validate server version compatibility on first connection CVSPreferencesPage.16=Confirm &move tag on tag operation CVSPreferencesPage.17=&Display detailed protocol output to stdout (for debugging purposes) CVSPreferencesPage.18=R&efresh tags when comparing or replacing tags CVSPreferencesPage.19=&Connection CVSPreferencesPage.23=C&onnection timeout: CVSPreferencesPage.24=Timeout must be positive CVSPreferencesPage.25=The timeout must be a number CVSPreferencesPage.26=&Quietness level: CVSPreferencesPage.27=Verbose CVSPreferencesPage.28=Somewhat quiet CVSPreferencesPage.29=Very quiet CVSPreferencesPage.20=Maximum &number of files displayed when committing: CVSPreferencesPage.21=Maximum files displayed must be positive CVSPreferencesPage.22=Maximum files displayed must be a number CVSPreferencesPage.30='Very Quiet' mode is dangerous CVSPreferencesPage.31=In 'Very Quiet' mode, some cvs servers may not communicate important information about errors that have occurred. You may want to consider using 'Somewhat quiet' mode instead. CVSPreferencesPage.32=Compre&ssion: CVSPreferencesPage.33=&Files and Folders CVSPreferencesPage.34=&Treat all new files as binary CVSPreferencesPage.35=Con&vert text files to use platform line ending CVSPreferencesPage.36=P&rune empty directories CVSPreferencesPage.37=&Delete unmanaged resources on replace CVSPreferencesPage.38=Default te&xt mode: CVSPreferencesPage.39=&Prompting CVSPreferencesPage.40=A&llow empty commit comments CVSPreferencesPage.41=A&utomatically save dirty editors before CVS operations CVSPreferencesPage.42=S&witch perspective after a 'Show Annotations' operation CVSPreferencesPage.43=D&efault perspective for 'Show Annotations': CVSPropertiesPage.update=Change &Tag... CVSPropertiesPage.virtualModule= CVSRemoteFilePropertySource.name=Name CVSRemoteFilePropertySource.revision=Revision CVSRemoteFilePropertySource.date=Date CVSRemoteFilePropertySource.author=Author CVSRemoteFilePropertySource.comment=Comment CVSRemoteFilePropertySource.tag=Tag CVSRemoteFolderPropertySource.name=Name CVSRemoteFolderPropertySource.tag=Tag CVSRemoteFolderPropertySource.none=(none) CVSRepositoryLocationPropertySource.default=Default CVSRepositoryLocationPropertySource.host=Host CVSRepositoryLocationPropertySource.user=User CVSRepositoryLocationPropertySource.port=Port CVSRepositoryLocationPropertySource.root=Root CVSRepositoryLocationPropertySource.method=Connection Method CVSSyncCompareInput.confirmMergeMessageTitle=Information CVSSyncCompareInput.confirmMergeMessage=Your changes have been saved. When you are finished, \ select 'Mark as Merged' to make this file an outgoing change. CVSSyncCompareInput.projectDeleted=Project ''{0}'' has been deleted locally and cannot be synchronized. CVSSyncCompareInput.filteringOutgoingChanges=Accumulating resources with outgoing changes CVSSyncSet.conflicts={0} conflicts, CVSSyncSet.incomings={0} incoming change(s), CVSSyncSet.noConflicts=No conflicts, CVSSyncSet.noIncomings=no incoming changes, CVSSyncSet.noOutgoings=no outgoing changes, CVSSyncSet.outgoings={0} outgoing change(s), CVSSyncSet.noNew=no new resources. CVSParticipant.0=Remote File ({0} - {1}) CVSParticipant.1=Common Ancestor ({0} - {1}) CVSParticipant.2=C&VS CVSSyncSet.new={0} new resource(s). CVSUIPlugin.refreshTitle=Refresh Resource? CVSUIPlugin.refreshQuestion={0} Would you like to refresh resource ''{1}''? CVSUIPlugin.refreshMultipleQuestion={0} Would you like to refresh the selected resources? CVSAction.disabledTitle=Information CVSAction.disabledMessage=The chosen operation is not enabled. CVSAction.refreshTitle=Refresh Project? CVSAction.refreshQuestion={0} Would you like to refresh project ''{1}''? CVSAction.refreshMultipleQuestion={0} Would you like to refresh the projects of the selected resources? CommitAction.commitFailed=Problems encountered performing commit CommitWizardCommitPage.0=Commit CommitWizardCommitPage.2=Enter a comment for the commit operation. CommitWizardCommitPage.3=Please enter a commit comment. CommitWizardCommitPage.4=Conflicting changes cannot be commited. Either exclude them from the commit or use the synchronize view to resolve the conflicts. CommitWizardCommitPage.1=There are {0} changes to be committed which exceeds the display threshold of {1}. CommitWizardCommitPage.5=Show &Changes CommitWizardFileTypePage.0=Add Resources CommitWizardFileTypePage.2=Unknown new files detected. CommitWizardFileTypePage.3=New files with the following unknown names or extensions have been detected in the workspace. Please specify whether these files should be stored as text or binary and whether this decision should be remembered. CommitSyncAction.questionRelease=You have changes that conflict with the server. Release those changes? CommitSyncAction.titleRelease=Confirm Overwrite CommitSyncAction.releaseAll=Release all changes, overriding any conflicting changes on the server. CommitSyncAction.releasePart=Only release the changes that don't conflict with changes on the server. CommitSyncAction.cancelRelease=Cancel the release operation. CommitSyncAction.errorCommitting=An error occurred while committing changes. CompareWithRemoteAction.compare=Error Comparing with Latest CompareWithRemoteAction.noRemote=No Remote Resource CompareWithRemoteAction.noRemoteLong=The selected resource has no remote resource to compare with. CompareWithRemoteAction.fetching=Comparing with latest from repository... CompareWithRevisionAction.compare=Error Comparing with Revision CompareWithRevisionAction.noRevisions=No Revisions CompareWithRevisionAction.noRevisionsLong=The selected resource has no revisions to compare with. CompareWithRevisionAction.fetching=Fetching revisions from repository... CompareWithTagAction.message=Compare With Branch or Version CompareWithTagAction.replace=Error Comparing With Branch or Version CompareWithTagAction.noRemote=No Remote Resource CompareWithTagAction.noRemoteLong=The selected tag has no remote resource to compare with. CompareWithTagAction.fetching=Fetching resources with tag {0}... CompareEditorInput.fileProgress=Comparing CVS file: {0} ConfigurationWizardAutoconnectPage.description=Your project already has CVS/ directories. It was probably previously shared, or checked out using another tool. It will be automatically shared using the following information. ConfigurationWizardAutoconnectPage.user=User: ConfigurationWizardAutoconnectPage.host=Host: ConfigurationWizardAutoconnectPage.port=Port: ConfigurationWizardAutoconnectPage.default=Default ConfigurationWizardAutoconnectPage.connectionType=Connection type: ConfigurationWizardAutoconnectPage.repositoryPath=Repository path: ConfigurationWizardAutoconnectPage.module=Module: ConfigurationWizardAutoconnectPage.validate=&Validate Connection on Finish ConfigurationWizardAutoconnectPage.noSyncInfo=Could not get folder information ConfigurationWizardAutoconnectPage.noCVSDirectory=Could not find CVS/ directory RepositorySelectionPage.description=This wizard will help you to share your files with the CVS repository for the first time. Your project will automatically be imported into the CVS repository, and the Synchronize view will open to allow you to commit your resources. RepositorySelectionPage.useExisting=&Use existing repository location: RepositorySelectionPage.useNew=&Create a new repository location ConfigurationWizardMainPage.connection=&Connection type: ConfigurationWizardMainPage.userName=&User: ConfigurationWizardMainPage.password=&Password: ConfigurationWizardMainPage.host=&Host: ConfigurationWizardMainPage.0=Location already exists. ConfigurationWizardMainPage.5=The host name must not start or end with a space ConfigurationWizardMainPage.1=User Name Required ConfigurationWizardMainPage.2=Host Required ConfigurationWizardMainPage.3=Port Required ConfigurationWizardMainPage.4=Repository Path Required ConfigurationWizardMainPage.useDefaultPort=Use Default P&ort ConfigurationWizardMainPage.usePort=Use Por&t: ConfigurationWizardMainPage.repositoryPath=&Repository path: ConfigurationWizardMainPage.invalidUserName=Invalid User Name ConfigurationWizardMainPage.invalidHostName=Invalid Host Name ConfigurationWizardMainPage.invalidPort=Invalid Port ConfigurationWizardMainPage.invalidPathWithSpaces=The repository path cannot have segments with leading or trailing spaces ConfigurationWizardMainPage.invalidPathWithSlashes=The repository path cannot contain a double slash (//) ConfigurationWizardMainPage.useNTFormat=Use NT path names for specifying CVSNT repository paths (e.g. C:\\cvs\\root) Console.copy=Copy Console.selectAll=Select All Console.clearOutput=Clear Output Console.resultServerError={0} {1} Console.resultWarnings={0} {1} Console.resultException=failed due to an internal error {0} Console.resultAborted=operation canceled {0} Console.resultOk=ok {0} Console.resultTimeFormat='(took 'm:ss.SSS')' Console.couldNotFormatTime=An error occurred formatting the output time for the CVS console. Console.preExecutionDelimiter=*** Console.postExecutionDelimiter=*** Console.info=Info: {0} Console.warning=Warning: {0} Console.error=Error: {0} AddToBranchAction.enterTag=Enter Branch Tag AddToBranchAction.enterTagLong=Enter the name of the branch: DiffAction.diff=Diff FixTypeAction.fix=Fix Types GenerateCVSDiff.title=Create Patch GenerateCVSDiff.pageTitle=Run and save CVS diff results in a file GenerateCVSDiff.pageDescription=The results of the CVS diff command can be used as an input file for the Apply Patch wizard. GenerateCVSDiff.overwriteTitle=Confirm Overwrite GenerateCVSDiff.overwriteMsg=A file with that name already exists. Overwrite? GenerateCVSDiff.error=Error running the CVS diff command GenerateCVSDiff.working=Running CVS diff... GenerateCVSDiff.noDiffsFoundMsg=No differences found. GenerateCVSDiff.noDiffsFoundTitle=CVS diff GenerateCVSDiff.1=Read-only file GenerateCVSDiff.2=The specified file is read-only and cannot be overwritten. GenerateCVSDiff.3=Can't write directory GenerateCVSDiff.4=You don't have permission to create a file in this directory. GetSyncAction.questionCatchup=You have local changes which you are about to overwrite. Should the conflicting changes be added? GetSyncAction.titleCatchup=Catch up Over Conflicts? GetSyncAction.catchupAll=Catch up to all incoming changes, overriding any conflicting local changes. GetSyncAction.catchupPart=Only catch up to the changes that don't conflict with local changes. GetSyncAction.cancelCatchup=Cancel the catch up operation. UpdateSyncAction.errorUpdating=An error occurred while updating changes. HistoryFilterDialog.title = Filter Resource History HistoryFilterDialog.showMatching = Show entries matching: HistoryFilterDialog.matchingAny = a&ny of the provided criteria HistoryFilterDialog.matchingAll = a&ll of the provided criteria HistoryFilterDialog.author = &Author: HistoryFilterDialog.comment = &Comment containing: HistoryFilterDialog.fromDate = &From date (M/D/Y) : HistoryFilterDialog.toDate = &To date (M/D/Y) : HistoryView.getAnnotateAction=Show &Annotation HistoryView.getContentsAction=&Get Contents HistoryView.getRevisionAction=Get Sticky &Revision HistoryView.tagWithExistingAction=&Tag with Existing... HistoryView.copy=&Copy HistoryView.revision=Revision HistoryView.tags=Tags HistoryView.date=Date HistoryView.author=Author HistoryView.comment=Comment HistoryView.refreshLabel=&Refresh View HistoryView.refresh=Refresh View HistoryView.linkWithLabel=Link with Editor HistoryView.selectAll=Select &All HistoryView.showComment=Show Comment Viewer HistoryView.showTags=Show Tag Viewer HistoryView.title=CVS Resource History HistoryView.titleWithArgument=CVS Resource History ({0}) HistoryView.overwriteTitle=Overwrite local changes? HistoryView.overwriteMsg=You have local changes. Do you want to overwrite them? HistoryView.fetchHistoryJob=Fetching CVS revision history HistoryView.fetchHistoryJobFile=Fetching CVS revision history for: {0} HistoryView.errorFetchingEntries=Error fetching entries for {0} IgnoreAction.ignore=Error Ignoring Resource MergeAction.saveChangesTitle=Save Changes MergeAction.saveChanges=You have unsaved changes that will be saved before the action is performed. MergeEditorInput.title=Merge {0} with {1} MergeWizard.title=Merge MergeWizard.0=Select the merge points MergeWizard.1=Specify the branch or version to be merged and the common base version. MergeWizardPage.0=Preview the merge in the &synchronize view MergeWizardPage.1=Perform the merge into the &local workspace MergeWizardPage.2=&Branch or version to be merged (end tag): MergeWizardPage.3=Br&owse... MergeWizardPage.4=Choose End Tag MergeWizardPage.5=&Select end tag MergeWizardPage.6=Common base &version (start tag): MergeWizardPage.7=Bro&wse... MergeWizardPage.8=Choose Start Tag MergeWizardPage.9=&Select start tag MergeWizardPage.10=The specified end tag is not known to exist. Either enter a different tag or refresh the known tags. MergeWizardPage.11=The specified start tag is not known to exist. Either enter a different tag or refresh the known tags. MergeWizardPage.12=The start and end tags cannot be the same. MergeWizardPage.13=A start tag is required for previewing a merge in the synchronize view. MergeWizard.preparing=Preparing merge wizard MergeWizard.preparingStart=Fetching tags for start page MergeWizard.preparingEnd=Fetching tags for end page MergeWizardEndPage.branches=Branches ModuleSelectionPage.moduleIsProject=Use &project name as module name ModuleSelectionPage.specifyModule=Use &specified module name: MoveTagAction.errorMessage=Error Tagging ModeWizardSelectionPage.10=Propo&se ModeWizardSelectionPage.11=Automatically propose a new mode for the file based\non its name and extension. This can be configured on the\nTeam > File Content preference page. ModeWizardSelectionPage.12=S&elect All ModeWizardSelectionPage.13=Select &None ModeWizardSelectionPage.14=Only sho&w those files ModeWizardSelectionPage.15=C&lear ModeWizardSelectionPage.17={0} files will be changed ModeWizardSelectionPage.18=SelectionPage ModeWizardSelectionPage.19=ASCII/Binary Property ModeWizardSelectionPage.20=Configure the way CVS transfers your files. ModeWizardSelectionPage.21=Fil&ter files by name (? = any character, * = any string) ModeWizardSelectionPage.22=C&hange the ASCII/Binary property for the selected files ModeWizardSelectionPage.23=For information about the different CVS ASCII/Binary modes refer to your CVS documentation. ModeWizardSelectionPage.24=Enter a c&ommit comment ModeWizardSelectionPage.25={0} files selected MoveTagAction.title=Tag with Existing Tag MoveTagAction.message=&Select the tag to be moved NewLocationWizard.title=Add CVS Repository NewLocationWizard.heading=Add a new CVS Repository NewLocationWizard.description=Add a new CVS Repository to the CVS Repositories view NewLocationWizard.validationFailedText=Error validating location: "{0}"\n\nKeep location anyway? NewLocationWizard.validationFailedTitle=Unable to Validate NewLocationWizard.exception=Unable to create repository location OpenLogEntryAction.deletedTitle=Resource is Deleted OpenLogEntryAction.deleted=The selected revision represents a deletion. It cannot be opened. ReleaseCommentDialog.title=Commit ReleaseCommentDialog.choosePrevious=Choose a &previously entered comment: ReleaseCommentDialog.enterComment=Edit the commit &comment: ReleaseCommentDialog.unaddedResources=Checked resources will be &added to CVS version control. ReleaseCommentDialog.selectAll=&Select All ReleaseCommentDialog.deselectAll=D&eselect All ReleaseCommentDialog.clearTextArea=&Reset Comment RemoteFolderElement.nameAndTag={0} {1} RemoteFolderElement.fetchingRemoteChildren=Fetching remote CVS children for ''{0}''... RemoveRootAction.removeRoot=Error Discarding Location ReplaceWithTagAction.message=Replace with Branch or Version ReplaceWithTagAction.replace=Error Replacing With Tag ReplaceWithTagAction.replacing=Replacing with tag {0} ReplaceWithTagAction.mixingTags=You are mixing tags within a project. This may cause confusion \ when synchronizing with the repository. Synchronize uses the tag information associated with \ each resource to determine the remote resource with which the local resource is compared. \ For example, with version tags, the state of the tagged resources never change so you will \ not see changes made to the resources in HEAD (or other branches). Do you wish to continue? ReplaceWithRemoteAction.replacing=Replacing ReplaceWithRemoteAction.problemMessage=Error Replacing With Latest From Repository ReplaceWithAction.confirmOverwrite=Confirm Overwrite ReplaceWithAction.localChanges={0} has local changes which you are about to overwrite. Do you wish to overwrite? ReplaceWithAction.calculatingDirtyResources=Finding outgoing changes... ReplaceWithLatestAction.multipleTags=La&test from Repository ReplaceWithLatestAction.multipleVersions=&Versions from Repository ReplaceWithLatestAction.multipleBranches=La&test from Branches ReplaceWithLatestAction.singleVersion=&Version {0} ReplaceWithLatestAction.singleBranch=La&test from Branch {0} ReplaceWithLatestAction.singleHEAD=La&test from {0} RepositoryDialog.getRepository=Select a repository RepositoryDialog.description=Select a repository to connect your project to RepositoryManager.getting=Getting RepositoryManager.committing=Committing RepositoryManager.updating=Updating RepositoryManager.deleting=Deleting RepositoryManager.adding=Adding RepositoryManager.rename=An IO Exception occurred while renaming the state file RepositoryManager.save=An IO Exception occurred while saving the state file RepositoryManager.ioException=An IO Exception occurred while reading the state file RepositoryManager.parsingProblem=An error occurred parsing file ''{0}''. RepositoryManager.fetchingRemoteFolders=Fetching remote CVS folders for ''{0}''... RepositoriesView.refresh=&Refresh View RepositoriesView.refreshTooltip=Refresh View RepositoriesView.new=&Repository Location... RepositoriesView.newSubmenu=&New RepositoriesView.newAnonCVS=&Anonymous Repository Location to dev.eclipse.org... RepositoriesView.newWorkingSet=Select Working Set... RepositoriesView.deselectWorkingSet=Deselect Working Set RepositoriesView.editWorkingSet=Edit Active Working Set... RepositoriesView.workingSetMenuItem={0} {1} RepositoriesView.collapseAll=Collapse All RepositoriesView.collapseAllTooltip=Collapse All RepositoriesView.NItemsSelected={0} items selected RepositoriesView.OneItemSelected=1 item selected RepositoriesView.ResourceInRepository={0} in {1} RepositoriesView.CannotGetRevision=Cannot get revision RemoteViewPart.workingSetToolTip=Working Set: {0} ResourcePropertiesPage.status=Status ResourcePropertiesPage.notManaged=Not managed by CVS ResourcePropertiesPage.versioned=versioned ResourcePropertiesPage.notVersioned=not versioned ResourcePropertiesPage.state=State ResourcePropertiesPage.checkedOut=Checked Out ResourcePropertiesPage.checkedIn=Checked In #ResourcePropertiesPage.baseRevision=Base Revision #ResourcePropertiesPage.none=none ResourcePropertiesPage.error=Error KSubstWizard.title=Set Keyword Substitution KSubstWizard.working=Setting keyword substitution mode... KSubstWizard.problemsMessage=Problems encountered setting keyword substitution KSubstWizard.errorTitle=Errors Occurred KSubstWizard.warningTitle=Warnings occurred KSubstWizardSharedFilesPage.pageTitle=Include versioned files KSubstWizardSharedFilesPage.pageDescription=\ Choose to include or exclude files that are already in the repository KSubstWizardSharedFilesPage.contents=\ Since the keyword substitution mode attribute is not version controlled, the \ change will be reflected immediately on all branches and in all revisions of \ any affected files that are already shared in the repository. You should inform \ all developers that they must delete and check out fresh copies of project containing the affected \ files before committing new changes to the repository. You may also experience \ side-effects working with earlier revisions of these files. KSubstWizardSharedFilesPage.includeSharedFiles=&Include files that are already shared in the repository. KSubstWizardSharedFilesPage.sharedFilesViewer.title=&The following files were selected and are already shared in the repository: KSubstWizardDirtyFilesPage.pageTitle=Include files with outgoing changes KSubstWizardDirtyFilesPage.pageDescription=\ Choose to include or exclude files with outgoing changes KSubstWizardDirtyFilesPage.contents=\ This operation may commit changes to files without first providing a chance to resolve \ conflicts. KSubstWizardDirtyFilesPage.includeDirtyFiles=&Include files that have outgoing changes. KSubstWizardDirtyFilesPage.dirtyFilesViewer.title=&The following files were selected and have outgoing changes. KSubstWizardSelectionPage.pageTitle=Select Keyword Substitution Mode KSubstWizardSelectionPage.pageDescription=\ Choose the desired keyword substitution mode for the selected files. KSubstWizardSelectionPage.automaticButton=&Automatic KSubstWizardSelectionPage.automaticLabel=\ Automatically chooses ''{0}'' or ''{1}'' \ for each file according to the Team file extension preferences. KSubstWizardSelectionPage.binaryButton=&Binary (-kb) KSubstWizardSelectionPage.binaryLabel=\ Binary files are stored in the repository without alteration.\n\ CVS does not directly support conflict resolution for binary files. KSubstWizardSelectionPage.textButton=A&SCII without keyword substitution (-ko) KSubstWizardSelectionPage.textLabel=\ End of lines are replaced with the appropriate convention for the client system.\n\ CVS supports conflict resolution and differencing of ASCII files with single line granularity. KSubstWizardSelectionPage.textWithSubstitutionsButton=ASCII with &keyword substitution KSubstWizardSelectionPage.textWithSubstitutionsLabel=\ End of lines are replaced with the appropriate convention for the client system.\n\ ASCII files may contain keywords that are expanded by the CVS server during file transfers.\n\ Please consult the CVS documentation for a description of the various supported keywords and modes. KSubstWizardCommitCommentPage.pageTitle=Enter Commit Comment KSubstWizardCommitCommentPage.pageDescription=\ Enter the commit comment to be used for the selected files when they are committed. KSubstWizardSummaryPage.pageTitle=Summary KSubstWizardSummaryPage.pageDescription=\ Summary of keyword substitution changes to be performed. KSubstWizardSummaryPage.contents=\ Click on \'Finish\' to change the keyword substitution mode of the checked files indicated below.\n\ You can change the mode on a per file basis by clicking in the corresponding cell.\n\ Note: Files that are not checked, or that already have the indicated mode will not be affected in any way. KSubstWizardSummaryPage.showUnaffectedFiles=&Show files that already have the requested keyword substitution mode. KSubstWizardSummaryPage.summaryViewer.title=&The following checked files will have their keyword substitution mode changed to the indicated value. KSubstWizardSummaryPage.summaryViewer.fileHeader=File Location KSubstWizardSummaryPage.summaryViewer.ksubstHeader=Keyword Substitution Mode SetKeywordSubstitutionAction.label=Cha&nge ASCII/Binary Property... SetKeywordSubstitutionAction.tooltip=Change whether the selected resources should be treated as ASCII or binary on the CVS Server SharingWizard.autoConnectTitle=Connect Project to Repository SharingWizard.autoConnectOneOTitle=Connect Project from Eclipse 1.0 to Repository SharingWizard.autoConnectTitleDescription=Project is already configured with CVS repository information. SharingWizard.couldNotImport=Remote Project Exists SharingWizard.couldNotImportLong=Module ''{0}'' already exists remotely. Would you like to synchronize your local project with the existing remote module? SharingWizard.selectTagTitle=Select Tag SharingWizard.selectTag=&Select the tag to synchronize with: SharingWizard.description=Configure a Project to Use CVS SharingWizard.importTitle=Share Project with CVS Repository SharingWizard.importTitleDescription=Select an existing repository location or create a new location. SharingWizard.title=Share Project SharingWizard.heading=Configure a Project to Use CVS SharingWizard.enterInformation=Enter Repository Location Information SharingWizard.enterInformationDescription=Define the location and protocol required to connect with an existing CVS repository. SharingWizard.enterModuleName=Enter Module Name SharingWizard.enterModuleNameDescription=Select the name of the module in the CVS repository. SharingWizard.validationFailedText={0}. Set project sharing anyway? SharingWizard.validationFailedTitle=Unable to Validate SharingWizardFinishPage.message=The wizard has all the information necessary to share your project with the CVS repository. When you click \"Finish\", the wizard will import your project into the repository and open the Synchronize view to allow you to commit your resources. ShowHistoryAction.showHistory=Error occurred performing Show History ShowHistoryAction.noHistory=No History Available ShowHistoryAction.noHistoryLong=No resource history available for selected resources. SyncAction.sync=Synchronize SyncAction.workingSetName=Latest CVS Synchronize SyncAction.noChangesTitle=No Changes SyncAction.noChangesMessage=There are no changes between the workspace resource and the remote. TagAction.tagErrorTitle=Tagging Error TagAction.tagWarningTitle=Tagging Warning TagAction.tagProblemsMessage=Problems reported tagging the resource. TagAction.tagProblemsMessageMultiple=Problems tagging the resources. {0} project(s) successfully tagged and {1} project(s) with errors. TagAction.tagResources=Tag Resources TagRefreshButtonArea.0=No Tags Found TagRefreshButtonArea.1=Perform &Deep Search TagRefreshButtonArea.2=Confi&gure Manually TagRefreshButtonArea.3=&Cancel TagRefreshButtonArea.4=Tags were not found for {0} using the auto-refresh files and a shallow cvs log operation. You can choose to search using a deep cvs log operation, to manually configure the tags or to cancel. TagRefreshButtonArea.5=Refreshing tags TagRefreshButtonArea.6=Refreshing tags... TagRefreshButtonArea.7=No tags could be found. TagRefreshButtonArea.8= TagAction.enterTag=&Please enter a version tag: TagAction.moveTag=&Move tag if it already exists TagRootElement.0=Dates TagLocalAction.0=There are uncommitted changes in ''{0}'' that will not be tagged. Should ''{0}'' be tagged? TagLocalAction.1=The following contain &uncommitted changes that will not be versioned. Check those that should be included in the tag operation. TagLocalAction.2=There are uncommitted changes in ''{0}'' that will not be tagged. Should the tag operation proceed? TagLocalAction.4=Tag with Uncommitted Changes TagAction.moveTagConfirmTitle=Confirm Move Existing Tag TagAction.moveTagConfirmMessage=If the tag {0} is already used in this project, it will be moved to the selected revisions. Are you sure you want to perform the tag operation? TagAction.uncommittedChangesTitle=Confirm Uncommitted Changes TagAction.uncommittedChanges=You are tagging ''{0}'' that has uncommitted changes. These changes are not in the repository and will not be included in the version you are creating. Do you still want to tag this resource? TagAction.tagAlreadyExists=Version tag already exists. TagAction.existingVersions=Existing Versions TagInRepositoryAction.tagProblemsMessage=Problems reported tagging the resource. TagInRepositoryAction.tagProblemsMessageMultiple=Problems tagging the resources. {0} resource(s) successfully tagged and {1} resource(s) with errors. UpdateAction.update=Problems encountered performing update UpdateAction.updating=Updating... UpdateAction.promptForUpdateSeveral=Are you sure you want to update {0} resources? UpdateAction.promptForUpdateOne=Are you sure you want to update {0} resource? UpdateAction.promptForUpdateTitle=Confirm Update UpdateWizard.title=Update UpdateWizard.0=Select Tag UpdateWizard.1=Select the tag for the update UpdateWizard.updatePage=Update Options UpdateWizardPage.description=Select other options for the update UserValidationDialog.required=Password Required UserValidationDialog.labelUser={0} UserValidationDialog.labelPassword={1} UserValidationDialog.password=&Password: UserValidationDialog.user=&User name: KeyboradInteractiveDialog.message=Keyboard Interactive authentication for {0} KeyboardInteractiveDialog.labelRepository=Enter values for the following repository: {0} VersionsElement.versions=Versions WorkbenchUserAuthenticator.cancelled=Operation cancelled because login cancelled WorkbenchUserAuthenticator.0=An attempt to prompt for user authentication information has failed. WorkbenchUserAuthenticator.1=Host Key Change WorkbenchUserAuthenticator.2=The host key for {0} has changed. It is possible that this was intentional but there is also a chance that you are the target of an attack of some kind. If you know that the host key has changed, click OK and existing host key will be purged. Otherwise, click Cancel and consult with your system administrator WorkbenchUserAuthenticator.errorFlushing=Error occurred while flushing password for {0} WorkbenchUserAuthenticator.errorSaving=Error occurred while saving password for {0} Unmanage.unmanaging=Disconnecting from CVS... Unmanage.unmanage=Disconnect from CVS Unmanage.title=Confirm Disconnect from CVS Unmanage.titleN=Confirm Multiple Project Disconnect from CVS Unmanage.message=Are you sure you want to disconnect CVS from ''{0}''? Unmanage.messageN=Are you sure you want to disconnect CVS from these {0} projects? Unmanage.option1=Do not delete the CVS meta information (e.g. CVS sub-directories). Unmanage.option2=Also delete the CVS meta information from the file system. Unmanage.unmanagingError=Errors occurred while disconnecting Unmanage.message=Are you sure you want to disconnect CVS from ''{0}''? Unmanage.messageN=Are you sure you want to disconnect CVS from these {0} projects? Save_To_Clipboard_2=&Save to clipboard Save_In_File_System_3=Sa&ve in file system Browse..._4=Br&owse... Save_Patch_As_5=Save Patch As patch.txt_6=patch.txt Save_In_Workspace_7=Save in &workspace Select_a_folder_then_type_in_the_file_name__8=Select a fol&der then type in the file name: Fi&le_name__9=Fi&le name: Do_not_recurse_into_sub-folders_10=&Recurse into sub-folders Do_not_include_new_files_in_patch_11=&Include new files in patch Diff_output_format_12=Diff output format Unified_(format_required_by_Compare_With_Patch_feature)_13=&Unified (format required by the Apply Patch wizard) Context_14=&Context Standard_15=&Standard Advanced_options_19=Advanced options Configure_the_options_used_for_the_CVS_diff_command_20=Configure the options used for the CVS diff command After_configuring_the_project__1=After configuring the project: Open_the_Synchronize_view_on_the_project_2=Open the Synchronize view on the project Automatically_import_the_local_resources_into_the_repository_3=Automatically import the local resources into the repository Run_update_4=Run update Do_nothing_5=Do nothing Validate_Connection_on_Finish_7=Validate Location on Finish TagSelectionDialog.Select_a_Tag_1=&Select a branch or version TagSelectionDialog.recurseOption=Recurse into sub-&folders TagSelectionDialog.0=&Add Date... TagSelectionDialog.1=&Remove TagSelectionDialog.2=No Tags Found TagSelectionDialog.3=Perform Deep Search TagSelectionDialog.4=Configure Manually TagSelectionDialog.5=Cancel TagSelectionDialog.6=Tags were not found for {0} using the auto-refresh files and a shallow cvs log operation. You can choose to search using a deep cvs log operation, to manually configure the tags or to cancel. TagSelectionDialog.7=Refreshing tags TagSelectionDialog.8=Error refreshing tags TagSelectionArea.0=&Matching tags: TagSelectionArea.1={0}: TagSelectionArea.2={0} (? = any character, * = any String): TagSelectionArea.3=Select a &tag TagSelectionWizardPage.0=&Use the tag currently associated with the workspace resources TagSelectionWizardPage.1=&Select the tag from the following list UpdateSyncAction.Conflicting_changes_found_1=Conflicting changes found UpdateSyncAction.You_have_local_changes_you_are_about_to_overwrite_2=You have local changes you are about to overwrite UpdateSyncAction.Only_update_resources_that_can_be_automatically_merged_3=Only update resources that can be automatically merged UpdateSyncAction.Update_all_resources,_overwriting_local_changes_with_remote_contents_4=Update all resources, overwriting local changes with remote contents UpdateSyncAction.Overwrite_local_changes__5=Overwrite local changes? UpdateSyncAction.You_have_local_changes_you_are_about_to_overwrite._Do_you_wish_to_continue__6=You have local changes you are about to overwrite. Do you wish to continue? ExtMethodPreferencePage_message=These variables define the external connection program to use with the \'ext\' connection method. These values should be the same as the \'ext\' CVS command-line environment variable settings. ExtMethodPreferencePage_CVS_RSH=CVS_&RSH: ExtMethodPreferencePage_Browse=&Browse... ExtMethodPreferencePage.0=Use an &external program to connect ExtMethodPreferencePage.2=Choosing to use another connection method allows the meta information in CVS projects to be compatible with external CVS tools while using a custom connection method. ExtMethodPreferencePage.1=Use another &connection method type to connect ExtMethodPreferencePage_Details=Select a program or script ExtMethodPreferencePage_CVS_RSH_Parameters=&Parameters: ExtMethodPreferencePage_Add_Variable=&Add Variable... ExtMethodPreferencePage_CVS_SERVER__7=CVS_&SERVER: UpdateMergeActionProblems_merging_remote_resources_into_workspace_1=Problems merging remote resources into workspace UpdateMergeActionProblems_merging_remote_resources_into_workspace_2=Problems merging remote resources into workspace TagConfigurationDialog.1=Configure Branches and Versions for {0} TagConfigurationDialog.4=Configure tags you will see in the workbench. TagConfigurationDialog.5=&Browse files for tags: TagConfigurationDialog.6=&New tags found in the selected files: TagConfigurationDialog.7=Remembered &tags for these projects: TagConfigurationDialog.8=&Add Checked Tags TagConfigurationDialog.9=&Remove TagConfigurationDialog.0=Add &Date... TagConfigurationDialog.10=Re&move All TagConfigurationDialog.11=&List of files to be automatically examined when refreshing tags: TagConfigurationDialog.12=A&dd Selected Files TagConfigurationDialog.13=Rem&ove TagConfigurationDialog.14=Error fetching tags from remote CVS files TagConfigurationDialog.20=&Refresh Tags TagConfigurationDialog.21=&Configure Tags... TagConfigurationDialog.22=Updating Tags ChangeListener.Deleting_CVS_folders_1=Deleting CVS folders ChangeListener.Folders_cannot_be_deleted_from_a_CVS_server_from_the_client._To_delete_the_folder_2=Folders cannot be deleted from a CVS server from the client. To delete the folder ChangeListener.Do_not_ask_me_about_this_again_3=Do not ask me about this again ConfigureTagsFromRepoViewConfigure_Tag_Error_1=Configure Tag Error RemoteRootAction.label=Discard location RemoteLogOperation.0=Fetching log information from {0} RemoteLogOperation.1=Fetching log information RemoveDateTagAction.0=&Remove RemoteRootAction.Unable_to_Discard_Location_1=Unable to Discard Location RemoteRootAction.Projects_in_the_local_workspace_are_shared_with__2=Projects in the local workspace are shared with {0}. This location cannot be discarded until all local projects are disconnected from it. RemoveRootAction.removeRoot_3=RemoveRootAction.removeRoot RemoteRootAction.The_projects_that_are_shared_with_the_above_repository_are__4=The projects that are shared with the above repository are: BranchCategory.Branches_1=Branches GroupedByVersionCategory.Versions_1=Versions VersionCategory.Versions_1=Versions ModulesCategory.label=Modules HistoryView.[...]_4=[...] CVSProjectPropertiesPage.connectionType=Connection type: CVSProjectPropertiesPage.user=User: CVSProjectPropertiesPage.Select_a_Repository_1=Select a Repository CVSProjectPropertiesPage.Select_a_CVS_repository_location_to_share_the_project_with__2=Select a compatible CVS repository location to share the project with: CVSProjectPropertiesPage.Change_Sharing_5=&Change Sharing... CVSProjectPropertiesPage.fetchAbsentDirectoriesOnUpdate=&Fetch absent or new directories when updating CVSProjectPropertiesPage.configureForWatchEdit=Enable watch/edit for this project CVSProjectPropertiesPage.progressTaskName=Updating project's CVS properties CVSProjectPropertiesPage.setReadOnly=Setting all files read-only CVSProjectPropertiesPage.clearReadOnly=Setting all files writable CVSRepositoryPropertiesPage.Confirm_Project_Sharing_Changes_1=Confirm Project Sharing Changes CVSPreferencePage.Save_dirty_editors_before_CVS_operations_1= CVSRepositoryPropertiesPage.There_are_projects_in_the_workspace_shared_with_this_repository_2=There are projects in the workspace shared with this repository. The projects will be updated with the new information that you have entered CVSRepositoryPropertiesPage.sharedProject=The projects that are shared with {0} are: CVSRepositoryPropertiesPage.useDefaultProgramName=Expect the &default program name "cvs" in text message prefixes from this server CVSRepositoryPropertiesPage.useProgramName=Expect a custom &program name: CVSRepositoryPropertiesPage.useLocationAsLabel=Use the &repository identification string as the label CVSRepositoryPropertiesPage.useCustomLabel=Use a custom &label: CVSProjectSetSerializer.Confirm_Overwrite_Project_8=Confirm Overwrite Project CVSProjectSetSerializer.The_project_{0}_already_exists._Do_you_wish_to_overwrite_it__9=The project {0} already exists. Do you wish to overwrite it? IgnoreResourcesDialog.titleSingle=Add {0} to .cvsignore IgnoreResourcesDialog.titleMany=Add {0} resources to .cvsignore IgnoreResourcesDialog.prompt=Select what to add to the .cvsignore file(s): IgnoreResourcesDialog.addNameEntryButton=Resource(s) by name IgnoreResourcesDialog.addNameEntryExample=Examples: file1.so, file2.so, .rcfile, bin IgnoreResourcesDialog.addExtensionEntryButton=Wildcard extension IgnoreResourcesDialog.addExtensionEntryExample=Examples: *.so, *.rcfile, bin IgnoreResourcesDialog.addCustomEntryButton=Custom pattern IgnoreResourcesDialog.addCustomEntryExample=The wildcard characters '*' and '?' are permitted. IgnoreResourcesDialog.patternMustNotBeEmpty=Pattern must not be empty. IgnoreResourcesDialog.patternDoesNotMatchFile=Pattern does not match all selected resources: e.g. {0} ContentAction.Confirm_Long_Operation_1=Confirm Long Operation ContentAction.Changing_this_setting_will_involve_contacting_the_server_and_may_be_long-running_2=Changing this setting will involve contacting the server and may be long-running CVSProjectPropertiesPage.You_can_change_the_sharing_of_this_project_to_another_repository_location._However,_this_is_only_possible_if_the_new_location_is___compatible___(on_the_same_host_with_the_same_repository_path)._1=You can change the sharing of this project to another repository location. However, this is only possible if the new location is \"compatible\" (on the same host with the same repository path). ConfigurationWizardMainPage.Location_1=Location ConfigurationWizardMainPage.Authentication_2=Authentication ConfigurationWizardMainPage.Connection_3=Connection AlternateUserValidationDialog.Enter_Password_2=Enter Password AlternateUserValidationDialog.OK_6=OK AlternateUserValidationDialog.Cancel_7=Cancel AlternateUserValidationDialog.message=Enter the password for {0}: WorkbenchUserAuthenticator.The_operation_was_canceled_by_the_user_1=The operation was canceled by the user CVSCatchupReleaseViewer.No_workspace_file_1=No workspace file CVSCatchupReleaseViewer.Select_&Outgoing_Additions_1=Select New Reso&urces ForceCommitSyncAction.Outgoing_Changes_Not_Added_1=Outgoing Changes Not Added ForceCommitSyncAction.You_have_chosen_to_commit_new_resources_which_have_not_been_added_to_version_control._Do_you_wish_to_add_them_to_version_control_now__2=You have chosen to commit new resources which have not been added to version control. Do you wish to add them to version control now? WorkingSetSelectionArea.workingSetOther=&Other... ListSelectionArea.selectAll=&Select All ListSelectionArea.deselectAll=&Deselect All RestoreFromRepositoryWizard.fileSelectionPageTitle=Restore from Repository RestoreFromRepositoryWizard.fileSelectionPageDescription=Select the revision of each file that should be restored. RestoreFromRepositoryFileSelectionPage.fileSelectionPaneTitle={0} - Select file to be restored: RestoreFromRepositoryFileSelectionPage.revisionSelectionPaneTitle={0} - Check revision to be restored: RestoreFromRepositoryFileSelectionPage.fileToRestore={0} ({1} to be restored) RestoreFromRepositoryFileSelectionPage.fileContentPaneTitle={0} {1} in ''{2}'' RestoreFromRepositoryFileSelectionPage.emptyRevisionPane=Remote revisions of selected file: RestoreFromRepositoryFileSelectionPage.fileExists=File ''{0}'' already exists locally. RestoreFromRepositoryFileSelectionPage.revisionIsDeletion=Revision {0} of {1} is the deletion and can not be restored. Select another revision of this file. RestoreFromRepositoryAction.noFilesTitle=No Deleted Files Found RestoreFromRepositoryAction.noFilesMessage=There were no deleted files found on the repository in folder ''{0}''. RepositoryRoot.folderInfoMissing=Local folder ''{0}'' is not properly mapped to a remote folder. RepositoriesViewContentHandler.unmatchedTag=No matching end tag found for tag ''{0}'' while reading repositories View configuration file. RepositoriesViewContentHandler.missingAttribute=Required attribute ''{1}'' missing from tag ''{0}'' while reading repositories View configuration file. RepositoriesViewContentHandler.errorCreatingRoot=An error occurred trying to create repository ''{0}''. CVSWorkingSetFolderSelectionPage.projectSelectionPageTitle=CVS Working Set CVSWorkingSetFolderSelectionPage.projectSelectionPageDescription=Enter a working set name and select the working set folders. CVSWorkingSetFolderSelectionPage.name=&Working set name: CVSWorkingSetFolderSelectionPage.treeLabel=Working &set contents: CVSWorkingSetFolderSelectionPage.refresh=&Refresh Contents CVSWorkingSetFolderSelectionPage.invalidWorkingSetName=The name must contain only letters and digits. CVSWorkingSetFolderSelectionPage.duplicateWorkingSetName=A working set of the specific name already exists. CVSWorkingSetFolderSelectionPage.mustSelectFolder=At least one folder must be checked. WorkingSetSelectionDialog.title= Select CVS Working Set WorkingSetSelectionDialog.title.multiSelect= Select CVS Working Sets WorkingSetSelectionDialog.message= &Select a CVS working set: WorkingSetSelectionDialog.message.multiSelect= &Select CVS working sets: WorkingSetSelectionDialog.detailsButton.label= &Edit... WorkingSetSelectionDialog.newButton.label= &New... WorkingSetSelectionDialog.removeButton.label= &Remove RefreshTagsAction.title=Refresh Branch and Version Tags? RefreshTagsAction.message=Repository ''{0}'' has {1} projects to refresh. Continue? WatchEditPreferencePage.description=Settings for CVS Watch/Edit. WatchEditPreferencePage.checkoutReadOnly=&Configure projects to use Watch/Edit on checkout WatchEditPreferencePage.validateEditSaveAction=When read-only files are modified in an editor WatchEditPreferencePage.edit=Send a CVS &edit notification to the server WatchEditPreferencePage.highjack=Edit the file &without informing the server WatchEditPreferencePage.editPrompt=Before a CVS edit notification is sent to the server WatchEditPreferencePage.neverPrompt=&Never prompt WatchEditPreferencePage.alwaysPrompt=Always &prompt WatchEditPreferencePage.onlyPrompt=&Only prompt if there are other editors Uneditaction.confirmMessage=Overwrite local changes to edited files? Uneditaction.confirmTitle=Confirm Unedit FileModificationValidator.promptTitle=CVS Edit Files? FileModificationValidator.promptMessage=There are read-only files being modified. Should a 'cvs edit' be performed? FileModificationValidator.vetoMessage=User vetoed file modification RefreshRemoteProjectWizard.title=Refresh Branches RefreshRemoteProjectWizard.0=Tags not found for some modules RefreshRemoteProjectWizard.1=Search Deeply RefreshRemoteProjectWizard.2=Skip RefreshRemoteProjectWizard.3=Tags were not found on module {0} using the auto-refresh files and a shallow cvs log operation. You can choose to search this module using a deep cvs log operation or skip it. RefreshRemoteProjectWizard.4=Tags were not found on {0} modules using the auto-refresh files and a shallow cvs log operation. You can choose to search these module using a deep cvs log operation or skip them. RefreshRemoteProjectSelectionPage.pageTitle=Select Projects RefreshRemoteProjectSelectionPage.pageDescription=Select the remote projects whose tags should be refreshed. RefreshRemoteProjectSelectionPage.selectRemoteProjects=This wizard helps discover the tags associated with one or more remote projects. &Check the projects whose tags you wish to refresh. RefreshRemoteProjectSelectionPage.noWorkingSet=Do not &use a working set RefreshRemoteProjectSelectionPage.workingSet=Select a &working set (matching projects will be checked): EditorsView.file=File name EditorsView.user=User name EditorsView.date=Date EditorsView.computer=Computer name EditorsDialog.title=Editors EditorsDialog.question=The resource already has editors. Do you still want to edit the resource and send a CVS edit notification to server? EditorsAction.classNotInitialized={0} not initialized TargetLocationSelectionDialog.projectNameLabel=&Project Name: TargetLocationSelectionDialog.useDefaultLabel=Use default &workspace location TargetLocationSelectionDialog.locationLabel=&Location: TargetLocationSelectionDialog.parentDirectoryLabel=&Directory: TargetLocationSelectionDialog.browseLabel=&Browse... TargetLocationSelectionDialog.messageForSingle=Select the parent directory for project {0}. TargetLocationSelectionDialog.messageForMulti=Select the parent directory for the {0} projects. TagetLocationSelectionDialog.locationEmpty=Project contents directory must be specified. TagetLocationSelectionDialog.invalidLocation=Invalid location path. TagetLocationSelectionDialog.alreadyExists=Project {0} already exists. SynchronizeProjectsDialog.title=Synchronize CVS Projects SynchronizeProjectsDialog.selectProjects=Projects to be synchronized SynchronizeProjectsDialog.syncOutgoingChanges=Only synchronize projects with outgoing &changes SynchronizeProjectsDialog.allSharedProjects=Include &all projects shared with CVS SynchronizeProjectsDialog.sharedWorkingSetProjects=Include &working set resources shared with CVS: RemoteFileEditorInput.fullPathAndRevision={0} {1} CheckoutOperation.thisResourceExists=The resource ''{0}'' already exists in the workspace and will be deleted. Proceed with the check out of ''{1}''? CheckoutOperation.thisExternalFileExists=The folder ''{0}'' exists in the local file system and will be deleted. Proceed with the check out of ''{1}''? CheckoutOperation.confirmOverwrite=Confirm Overwrite CheckoutOperation.scrubbingProject=Scrubbing project ''{0}''. CheckoutOperation.refreshingProject=Configuring project ''{0}''. CheckoutSingleProjectOperation.taskname=Checking out ''{0}'' from CVS CheckoutMultipleProjectsOperation.taskName=Checking out {0} folders from CVS CheckoutIntoOperation.taskname=Checking out {0} folders from CVS into ''{1}'' CheckoutIntoOperation.targetIsFile=Folder ''{0}'' cannot be checked out because file ''{1}'' is in the way. CheckoutIntoOperation.targetIsFolder=Folder ''{0}'' cannot be checked out because folder ''{1}'' is in the way. CheckoutIntoOperation.targetIsPrunedFolder=Folder ''{0}'' cannot be checked out because it conflicts with the pruned folder ''{1}''. CheckoutIntoOperation.mappingAlreadyExists=Cannot checkout remote folder ''{0}'' into ''{1}'' because local folder ''{2}'' is already mapped to remote folder ''{0}''. CheckoutIntoOperation.cancelled=Checkout of ''{1}'' cancelled by user. CheckoutIntoOperation.overwriteMessage=Folder ''{0}'' already exists and will be deleted. Continue? AddToWorkspace.taskName1=Checking out ''{0}'' from CVS AddToWorkspace.taskNameN=Checking out {0} folders from CVS CheckoutAsAction.checkoutFailed=Problems encountered performing checkout CheckoutAsAction.enterProjectTitle=Check Out {0} As... CheckoutAsAction.enterLocationTitle=Check Out {0} Projects As... CheckoutAsAction.taskname=Checking out "{0}" from CVS as "{1}" CheckoutAsAction.multiCheckout=Checking out {0} projects from CVS CheckoutAsWizard.title=Check Out As CheckoutAsWizard.error=Problems encountered performing checkout CheckoutAsMainPage.title=Check Out As CheckoutAsMainPage.description=Select the method of check out CheckoutAsMainPage.singleFolder=Choose how to check out folder ''{0}'' CheckoutAsMainPage.asConfiguredProject=Check out as a project &configured using the New Project Wizard CheckoutAsMainPage.asSimpleProject=Check out as a &project in the workspace CheckoutAsMainPage.projectNameLabel=&Project Name: CheckoutAsMainPage.multipleFolders=Choose how to check out the {0} folders CheckoutAsMainPage.asProjects=Check out into the &workspace as projects CheckoutAsMainPage.intoProject=Check out &into an existing project CheckoutAsLocationSelectionPage.title=Check Out As CheckoutAsLocationSelectionPage.description=Select the project location CheckoutAsLocationSelectionPage.useDefaultLabel=Use default &workspace location CheckoutAsLocationSelectionPage.locationLabel=&Location: CheckoutAsLocationSelectionPage.parentDirectoryLabel=&Directory: CheckoutAsLocationSelectionPage.browseLabel=&Browse... CheckoutAsLocationSelectionPage.locationEmpty=Project contents directory must be specified. CheckoutAsLocationSelectionPage.invalidLocation=Invalid location path. CheckoutAsLocationSelectionPage.messageForSingle=Select the parent directory for project {0}. CheckoutAsLocationSelectionPage.messageForMulti=Select the parent directory for the {0} projects. CheckoutAsProjectSelectionPage.title=Check Out Into CheckoutAsProjectSelectionPage.description=Select the local folder that is the target of the checkout operation. CheckoutAsProjectSelectionPage.name=Target folder &name: CheckoutAsProjectSelectionPage.treeLabel=&Parent of target folder: CheckoutAsProjectSelectionPage.showLabel=&Filter project list: CheckoutAsProjectSelectionPage.recurse=&Checkout subfolders CheckoutAsProjectSelectionPage.showAll=Show all valid target projects CheckoutAsProjectSelectionPage.showUnshared=Show unshared projects CheckoutAsProjectSelectionPage.showSameRepo=Show projects shared with the same repository CheckoutAsProjectSelectionPage.invalidFolderName=''{0}'' is not a valid folder name TargetLocationSelectionDialog.projectNameLabel=&Project Name: TargetLocationSelectionDialog.useDefaultLabel=Use default &workspace location TargetLocationSelectionDialog.locationLabel=&Location: TargetLocationSelectionDialog.parentDirectoryLabel=&Directory: TargetLocationSelectionDialog.browseLabel=&Browse... TargetLocationSelectionDialog.messageForSingle=Select the parent directory for project {0}. TargetLocationSelectionDialog.messageForMulti=Select the parent directory for the {0} projects. TagetLocationSelectionDialog.locationEmpty=Project contents directory must be specified. TagetLocationSelectionDialog.invalidLocation=Invalid location path. TagetLocationSelectionDialog.alreadyExists=Project {0} already exists. CheckoutIntoWizard.title=Checkout Into CheckoutIntoWizard.projectSelectionPageTitle=Select local folder CheckoutIntoWizard.projectSelectionPageDescription=Select the local folder that is the target of the checkout operation. CheckoutIntoWizard.error=Checkout Error WorkspaceChangeSetCapability.1=New Set OpenCommitSetAction.20=Open Change in Compare Editor OpenCommitSetAction.21=Could not determine the repository location of the selected resources WorkspaceChangeSetCapability.2=New Change Set WorkspaceChangeSetCapability.3=Enter the name and comment for the new change set CVSChangeSetCollector.4=Retrieving revision histories CVSChangeSetCollector.0=Unassigned Remote Changes WorkspaceChangeSetCapability.7=Edit Change Set Comment WorkspaceChangeSetCapability.8=Edit the name and comment for the change set CheckoutIntoWizard.thisResourceExists=The resource ''{0}'' already exists in the workspace. Overwrite? CheckoutIntoWizard.confirmOverwrite=Confirm Overwrite CheckoutIntoWizard.mappingAlreadyExists=Cannot add remote folder ''{0}'' to project ''{1}'' as ''{2}'' because local folder ''{3}'' is already mapped to that folder. CheckoutIntoProjectSelectionPage.description=Choose the name and parent folder where ''{0}'' should be checked out to. CheckoutIntoProjectSelectionPage.name=Target folder &name: CheckoutIntoProjectSelectionPage.treeLabel=&Parent of target folder: CheckoutIntoProjectSelectionPage.showLabel=&Filter project list: CheckoutIntoProjectSelectionPage.showAll=Show all valid target projects CheckoutIntoProjectSelectionPage.showUnshared=Show unshared projects CheckoutIntoProjectSelectionPage.showSameRepo=Show projects shared with the same repository CheckoutIntoProjectSelectionPage.recurse=&Checkout subfolders CheckoutIntoProjectSelectionPage.invalidFolderName=''{0}'' is not a valid folder name HasProjectMetaFile.taskName=Looking for a remote meta file TagFromWorkspace.taskName=Tagging from workspace TagFromRepository.taskName=Tagging from repository UpdateOnlyMergeable.taskName=Updating mergeable changes UpdateDialog.overwriteTitle=Overwrite Local Changes? UpdateDialog.overwriteMessage=Do you want to overwrite local changes? ReplaceOperation.taskName=CVS Replace UpdateOperation.taskName=CVS Update SafeUpdateAction.warnFilesWithConflictsTitle=Non-mergeable files SafeUpdateAction.warnFilesWithConflictsDescription=Some conflicting files cannot be merged automatically with the update action. They contain conflicting changes that will have to be merged manually. Use the Synchronize View to find the conflicts then merge the changes in a compare editor. SafeUpdateAction.warnFilesWithConflictsTitle=Non-mergeable files SafeUpdateAction.warnFilesWithConflictsDescription=Some conflicting files cannot be merged automatically with the update action. They contain conflicting changes that will have to be merged manually. Use the Synchronize View to find the conflicts then merge the changes in a compare editor. Error.unableToShowSyncView=Error opening Synchronize View. Please ensure that the Team plugin is installed correctly. ShowAnnotationAction.1=Unexpected response from CVS Server: {0} ShowAnnotationAction.2=Annotate Binary File? ShowAnnotationAction.3=File {0} is marked as a binary file. The CVS annotation operation only works properly for files that contain text. Do you wish to continue? UpdateAction.jobName=CVS Update MergeUpdateAction.jobName=CVS Merge MergeUpdateAction.invalidSubscriber=Invalid subscriber: {0} CommitAction.jobName=CVS Commit CommitCommentArea.0= CommitCommentArea.1= CommitCommentArea.2=Empty commit comment CommitCommentArea.3=The commit comment is empty. Are you sure you would like to continue with an empty comment? CommitCommentArea.4=Re&member decision? OverrideAndUpdateAction.jobName=Performing CVS Override and Update on {0} resources WorkInProgressPreferencePage.6=None CheckoutProjectOperation.8=Checking out ''{0}'' into project ''{1}'' CheckoutProjectOperation.9=Checking out ''{0}'' into {1} projects CheckoutProjectOperation.0=Checkout of remote folder {0} cancelled by user CVSOperation.0=Errors occured in {0} of {1} operations. CVSOperation.1=Show CVS Console CVSOperation.2=Show CVS Console CVSModelElement.0=Error CVSModelElement.1=Error fetching resource list from repository. CVSDecorator.exceptionMessage=Errors occured while applying CVS decorations to resources. FetchMembersOperation.0=Fetching members of {0} RemoteRevisionQuickDiffProvider.readingFile=Error reading remote file RemoteRevisionQuickDiffProvider.closingFile=Error closing remote file RemoteRevisionQuickDiffProvider.fetchingFile=CVS QuickDiff: fetching remote contents RemoteCompareOperation.0=Comparing tags {0} and {1} of {2} WorkspaceToolbarCommitAction.label=Commit WorkspaceToolbarCommitAction.tooltip=Commit All Outgoing Changes... WorkspaceToolbarCommitAction.description=Commit All Outgoing Changes... WorkspaceToolbarCommitAction.image=checkin_action.gif WorkspaceToolbarUpdateAction.label=Update WorkspaceToolbarUpdateAction.tooltip=Update All Incoming Changes... WorkspaceToolbarUpdateAction.description=Update All Incoming Changes... WorkspaceToolbarUpdateAction.image=checkout_action.gif SharingWizardIgnore.label=Ignore SharingWizardIgnore.tooltip=Ignore Selected Resources... SharingWizardIgnore.description=Ignore Selected Resources... SharingWizardIgnore.image=ignorefiles.gif ConsoleRemoveAction.label=Close CVS Console ConsoleRemoveAction.tooltip=Close CVS console ConsoleRemoveAction.image=participant_rem.gif WorkspaceUpdateAction.label=&Update WorkspaceUpdateAction.tooltip=Perform an update on the selected resources WorkspaceUpdateAction.helpContextId=org.eclipse.team.cvs.ui.workspace_update_action OverrideAndUpdateAction.label=O&verride and Update OverrideAndUpdateAction.tooltip=Perform an override and update on the selected resources. This will make the local contents equal to the remote ignoring any local changes. OverrideAndUpdateAction.helpContextId=org.eclipse.team.cvs.ui.workspace_overupdate_action RefreshDirtyStateAction.label=C&lean Timestamps RefreshDirtyStateOperation.0=Problems encountered cleaning timestamps RefreshDirtyStateOperation.1=CVS Clean Timestamps RefreshDirtyStateAction.tooltip=Reset the dirty state of out-of-sync files whose contents match the server contents RefreshDirtyStateAction.helpContextId=org.eclipse.team.cvs.ui.workspace_refresh_dirty_state_action_context WorkspaceCommitAction.label=&Commit... WorkspaceCommitAction.tooltip=Perform a commit on the selected resources WorkspaceCommitAction.helpContextId="org.eclipse.team.cvs.ui.workspace_commit_action OverrideAndCommitAction.label=Override and Comm&it... OverrideAndCommitAction.tooltip=Perform an override and commit on the selected resources. This will make the remote contents equal to the local ignoring any remote changes. OverrideAndCommitAction.helpContextId=org.eclipse.team.cvs.ui.workspace_overcommit_action ConfirmMergedAction.label=&Mark as Merged ConfirmMergedAction.tooltip=Mark the conflict as merged by upgrading the base to match the remote ConfirmMergedAction.helpContextId=org.eclipse.team.cvs.ui.workspace_confirm_merged_action BranchAction.label=&Branch... BranchAction.tooltip=Branch IgnoreAction.label=A&dd to .cvsignore... IgnoreAction.0=Ignoring selected resources for project {0} IgnoreAction.1=Ignoring Resources IgnoreAction.tooltip=Ignore the Selected Resources when Synchronizing ShowResourceInHistoryAction.label=Show in Resource &History ShowResourceInHistoryAction.tooltip=Show in Resource History ShowAnnotationAction.label=Show &Annotation ShowAnnotationAction.tooltip=Show Annotation GenerateDiffFileAction.label=Create &Patch... GenerateDiffFileOperation.0=The file could not be written. Possible reasons are the directory is write-protected or not enough disk space is available. GenerateDiffFileOperation.1=The file could not be written due to an I/O error. GenerateDiffFileOperation.2=An I/O error occured. GenerateDiffFileWizard.0=Please enter a valid location. GenerateDiffFileWizard.2=Please enter a file name. GenerateDiffFileWizard.3=The specified directory does not exist. GenerateDiffFileWizard.4=Please select a location in the workspace. GenerateDiffFileWizard.5=Please enter a valid filename. GenerateDiffFileAction.tooltip=Compare your workspace contents with the server and generate a diff file that can be used as a patch file. MergeUpdateAction.label=&Update MergeUpdateAction.tooltip=Perform an update merge on the selected resources MergeUpdateAction.helpContextId=org.eclipse.team.cvs.ui.merge_update_action CompareRevertAction.label=&Override and Update CompareRevertAction.tooltip=Revert the local file contents to match that of their corresponding remotes CompareRevertAction.helpContextId=org.eclipse.team.cvs.ui.compare_revert_action SharingCommitAction.label=Commit SharingCommitAction.tooltip=Commit All Changes... SharingCommitAction.description=Commit All Changes... SharingCommitAction.image=checkin_action.gif MergeSynchronizeParticipant.8=Missing id initializing cvs merge participant MergeSynchronizeParticipant.9=Unable to initialize cvs merge subscriber MergeSynchronizeParticipant.10=Could not restore CVS Merge in Synchronize view: {0} MergeSynchronizeParticipant.11=Root resource in cvs merge subscriber is no longer in workspace, ignoring: {0} MergeSynchronizeParticipant.12=Missing root resources for cvs merge subscriber: {0} DisconnectOperation.0=Disconnecting DisconnectOperation.1=Disconnecting {0} SubscriberConfirmMergedAction.0=Synchronization information is missing for resource {0} SubscriberConfirmMergedAction.jobName=Performing a CVS Mark as Merged operation on {0} resources. CVSSubscriberAction.0=Invalid attemp to make unsupervised resource {0} in-sync. ReleaseCommentDialog.6=Review resources that will be committed: ReconcileProjectOperation.0=Reconciling project {0} with remote folder {1} CheckoutToRemoteFolderOperation.0=Downloading folder {0} CVSRepositoryPropertiesPage.21=Use this location's connection information for all connections CVSRepositoryPropertiesPage.22=Use the following locations for read and write access CVSRepositoryPropertiesPage.23=Read: CVSRepositoryPropertiesPage.24=Write: CVSRepositoryPropertiesPage.0=Confirm Host or Path Change CVSRepositoryPropertiesPage.1=You have chosen to change the host name or repository root path for this location. You should ensure that this new information still identifies the same repository. CompareRevertAction.0=Reverting {0} resources CompareParticipant.0={0} ({1}) ComparePreferencePage.0=Options for CVS comparisons: ComparePreferencePage.1=Show the &file author in compare editors ComparePreferencePage.2=Automatically enable chan&ge set grouping in CVS synchronizations ComparePreferencePage.3=Show revision &comparisons in a dialog ComparePreferencePage.4=Con&sider file contents in comparisons ComparePreferencePage.6=See ''{0}'' for compare editor preferences. FileModificationValidator.3=Perform Edit? FileModificationValidator.4=A CVS edit notification is required to be sent to the server in order to allow editing of one or more selected files. Continue? CVSSynchronizeViewPage.0=Show incoming grouped by comment CVSSynchronizeWizard.0=Unknown Participant.comparing=Comparing Participant.merging=Merging Participant.synchronizing=Synchronizing Participant.comparingDetail=Comparing {0} with {1} Participant.mergingDetail=Merging {0} Participant.synchronizingDetail=Synchronizing {0} CompareWithRevisionAction.4=Compare With Revision ReplaceWithRevisionAction.0=&Replace ReplaceWithRevisionAction.1=Replace With Revision ConsolePreferencesPage.4=&Show CVS console automatically when command is run ConsolePreferencesPage.5=&Limit console output ConsolePreferencesPage.6=&Fixed width console ConsolePreferencesPage.7=Character &width: ConsolePreferencesPage.8=&Console &buffer size (characters): ConsolePreferencesPage.9=CVS Console Settings: SharingWizard.23=Share Project Resources SharingWizard.24=Review and commit resources to the repository. Use the context menu to perform additional operations on the resources. SharingWizard.25=Module ''{0}'' exists on the server. Select the tag to synchronize with. SharingWizardSyncPage.0=Sharing ReconcileProjectOperation.1=Local resource {0} is a file while the corresponding remote {1} is a folder ReconcileProjectOperation.2=Local resource {0} is a folder while the corresponding remote {1} is a file ShareProjectOperation.0=Sharing project {0} as {1} SharingWizard.26=Keep Sharing? SharingWizard.27=Project {0} has been mapped to a remote module. Should this mapping be kept? SharingWizardSyncPage.3=The resources of project {0} are in-sync with the repository. SharingWizardSyncPage.4=An error has occurred populating this view. SharingWizardSyncPage.5=Show Errors SharingWizardSyncPage.8=Errors Occurred SharingWizardSyncPage.9=The following errors occurred. SharingWizardSyncPage.10=Commit Changes? SharingWizardSyncPage.11=There are still uncommitted changes that have not been shared. Should these changes be committed? SharingWizardSyncPage.12=Launch the &Commit wizard ShareProjectOperation.1=Calculating synchronization states CVSProjectPropertiesPage.31=Show only compatible repository locations CVSProjectPropertiesPage.32=Confirm CVSProjectPropertiesPage.33=The selected repository location may not be compatible with the current location. Are you sure you want to change sharing to the new location? RepositoryEncodingPropertyPage.2=Identify the file system encoding used by the server where the repository is located. Setting this will allow file names and commit comments to be properly translated between the client and server in cases where the server encoding differs from the client. RepositoryEncodingPropertyPage.3=Server Encoding RepositoryEncodingPropertyPage.0=Cannot Change Encoding RepositoryEncodingPropertyPage.1=Location {0} no longer exists. RepositoryEncodingPropertyPage.4=Note: this setting does not apply to file content encodings. File content encodings can be set on the Workbench/Editors preference page and on the Info property page of a project. CheckoutWizard.7=Checkout Project from CVS Repository CheckoutWizard.8=This wizard allows you to checkout projects from a CVS Repository. CheckoutWizard.0=Checkout from CVS CheckoutWizard.10=Select Module CheckoutWizard.11=Select the module to be checked out from CVS ModuleSelectionPage.2=Use an existing &module (this will allow you to browse the modules in the repository) CheckoutAsWizard.3=Select Tag CheckoutAsWizard.4=Choose the tag to check out from CheckoutAsMainPage.10=(Only available when the .project file does not exist in the repository) CVSTeamProvider.updatingFile=Updating {0} CVSTeamProvider.makeBranch=Creating branch CVSTeamProvider.folderInfo=Updating folder synchronization information for project {0} CVSTeamProvider.updatingFolder=Updating {0} AddOperation.0=Adding {0} BranchOperation.0=Branching BranchOperation.1=Branching {0} CommitOperation.0=Committing {0} CommitSetDialog.0=&Name: CommitSetDialog.2=Use the &title as the commit comment CommitSetDialog.3=Enter a commit &comment CommitWizard.0=Committing resources CommitWizard.1=Committing resources CommitWizard.2=Commit files CommitWizard.3=CommitWizard CommitWizard.4=Collecting outgoing changes CommitWizard.6=Nothing to Commit CommitWizard.7=The selected resouces do not contain any changes. UpdateOperation.0=Updating {0} ReplaceOperation.0=Replacing {0} ReplaceOperation.1=Scrubbing {0} TagOperation.0=Tagging {0} RemoteAnnotationStorage.1=As error occurred computing the content type of remote resource {0} DateTagCategory.0=Dates DateTagDialog.0=Date (M/D/Y): DateTagDialog.1=Include time component in tag DateTagDialog.2=Time (HH:MM:SS): DateTagDialog.3=Time is local DateTagDialog.4=Time is in universal time coordinates (UTC) DateTagDialog.5=Create Date Tag WorkbenchPreference.defaultEncoding = Defaul&t ({0}) WorkbenchPreference.otherEncoding = &Other: WorkbenchPreference.unsupportedEncoding = The selected encoding is not supported. LogEntryCacheUpdateHandler.0=Errors have occured while maintaining the log entry cache. LogEntryCacheUpdateHandler.1=Updating revision histories LogEntryCacheUpdateHandler.2=Could not fetch revision histories due to an internal timeout. MultiFolderTagSource.0={0} folders LocalProjectTagSource.0={0} Projects AnnotateView.0=Could not find an appropriate editor ModeWizard.0=ModeWizard ModeWizard.1=Change the ASCII/Binary Property ModeWizard.2=An error occurred ModeWizard.3=Setting file transfer mode... ModeWizard.4=Problems encountered while setting file transfer mode ModeWizard.5=Errors occured ModeWizard.6=Warnings occurred ModeWizardSelectionPage.2=File ModeWizardSelectionPage.3=ASCII/Binary Property ModeWizardSelectionPage.4=Path ModeWizardSelectionPage.8=&Reset ModeWizardSelectionPage.9=Reset the selected files to their current mode ReplaceWithTagAction.0=There are uncommitted changes in ''{0}'' that will be overwritten. Should ''{0}'' be replaced? ReplaceWithTagAction.1=The following contain &uncommitted changes that will be overwritten. Check those that should be included in the replace operation. ReplaceWithTagAction.2=There are uncommitted changes in ''{0}'' that will be overwritten. Should the replace proceed? ReplaceWithTagAction.4=Replace with Uncommitted Changes UncommittedChangesDialog.2=Select an item to see the dirty resources it contains. UncommittedChangesDialog.3=&The dirty resources contained in ''{0}'' UncommittedChangesDialog.4=&The full path of ''{0}'' AddWizard.0=Add to Version Control