###############################################################################
# Copyright (c) 2000, 2010 IBM Corporation, QNX Software Systems, and others.
# All rights reserved. This program and the accompanying materials
# are made available under the terms of the Eclipse Public License v1.0
# which accompanies this distribution, and is available at
# http://www.eclipse.org/legal/epl-v10.html
#
# Contributors:
# IBM - Initial API and implementation
# QNX Software Systems - [272416] Rework the working set configurations
###############################################################################

# ----------- Configuration Selection Page -----------
BuildPropertyPage.label.Platform=Project Type:
BuildPropertyPage.label.Configuration=Configuration:
BuildPropertyPage.label.Active=Active configuration
BuildPropertyPage.label.Settings=Configuration Settings
BuildPropertyPage.label.AddConfButton=Manage...
BuildPropertyPage.selection.configuration.all=All configurations
BuildPropertyPage.tip.platform=Select a platform for the project
BuildPropertyPage.tip.config=Select the configuration to edit
BuildPropertyPage.tip.manageconf=Manage configurations of the project
BuildPropertyPage.tip.remconf=Remove configurations for the platform
BuildPropertyPage.manage.title=Manage
BuildPropertyPage.error.Unknown_tree_element=Unknown type of element in tree of type {0}
BuildPropertyPage.error.version_low=The Managed Make project settings for this project are not available.
BuildPropertyPage.defaults.title=Reset Configuration Tools
BuildPropertyPage.defaults.message=This action will reset all of the tools in the selected configuration to their default settings.\n\nDo you want to proceed? 
BuildPropertyPage.changes.save.title=Apply Configuration Changes
BuildPropertyPage.changes.save.question=You have made changes to the {0} configuration.\n\nDo you want to apply these changes before switching to the {1} configuration? 
BuildPropertyPage.changes.save.error=The configuration changes could not be applied.
BuildPropertyPage.unsupported.proj=The project support is not installed on the system
BuildPropertyPage.unsupported.config=The configuration support is not installed on the system
BuildPropertyPage.config.notselected=No configurations selected

# ----------- Managed Build Custom Wizard Page Manager Error Strings -----------
MBSCustomPageManager.error0=Unknown element type 
MBSCustomPageManager.error1=\ for extension point 
MBSCustomPageManager.error2=Unknown child element type 
MBSCustomPageManager.error3=\ for wizardPage element in extension point 
MBSCustomPageManager.error4=Missing projectType ID
MBSCustomPageManager.error5=Missing toolchain ID
MBSCustomPageManager.error6=Missing nature ID


# ----------- Managed Build Preference Page -----------
BuildPreferencePage.label.Settings=Workspace Settings
BuildPreferencePage.job.rebuild=Rebuilding the Managed Projects
BuildPreferencePage.apply.internal.error=An Internal error has occurred. Please check error log.

#--------------- Resource Configuration Selection Page --------------
ResourceBuildPropertyPage.defaults.title=Reset Resource Configuration Tool
ResourceBuildPropertyPage.defaults.message=This action will reset all options of the tool in the current resource configuration to their default settings.\n\nDo you want to proceed? 

# ----------- New Env Var Dialog -----------
NewEnvVarDialog.label.name=Name
NewEnvVarDialog.label.value=Value
NewEnvVarDialog.label.delimiter=Delimiter
NewEnvVarDialog.label.operation=Operation
NewEnvVarDialog.label.operation.replace=Replace
NewEnvVarDialog.label.operation.prepend=Prepend
NewEnvVarDialog.label.operation.append=Append
NewEnvVarDialog.label.operation.remove=Delete
NewEnvVarDialog.label.value.prepend=Prepended Value
NewEnvVarDialog.label.value.append=Appended Value
NewEnvVarDialog.label.value.undef=<UNDEFINED>
NewEnvVarDialog.label.title.new=Define a new variable
NewEnvVarDialog.label.title.edit=Edit existing variable
NewEnvVarDialog.label.status.cannot.create=The "{0}" Variable can not be created by user

# ----------- Macros Block -----------
MacrosBlock.label.header.name=Name
MacrosBlock.label.header.type=Type
MacrosBlock.label.header.value=Value
MacrosBlock.label.button.new=New
MacrosBlock.label.button.edit=Edit
MacrosBlock.label.button.delete=Delete
MacrosBlock.label.button.check.chow.parent=Show parent context Build Variables
MacrosBlock.label.user.macros=User Build Variables
MacrosBlock.label.system.macros=System Build Variables
MacrosBlock.label.delete.confirm.title=Build Variable Deletion Confirmation
MacrosBlock.label.delete.confirm.message=Are you sure you want to delete the selected user Build Variable(s)? 
MacrosBlock.label.delete.all.confirm.title=Build Variables Deletion Confirmation
MacrosBlock.label.delete.all.confirm.message=Are you sure you want to delete all user Build Variables?
MacrosBlock.label.value.eclipse.dynamic=<ECLIPSE DYNAMIC VARIABLE>
MacrosBlock.label.type.text=String
MacrosBlock.label.type.text.list=String List
MacrosBlock.label.type.path.file=File
MacrosBlock.label.type.path.dir=Directory
MacrosBlock.label.type.path.file.list=File List
MacrosBlock.label.type.path.dir.list=Directory List
MacrosBlock.label.type.path.any=Path
MacrosBlock.label.type.path.any.list=Path List

# ----------- New Build Macro Dialog -----------
NewBuildMacroDialog.label.value=Value:
NewBuildMacroDialog.label.type=Type:
NewBuildMacroDialog.label.type.text=String
NewBuildMacroDialog.label.type.text.list=String List
NewBuildMacroDialog.label.type.path.file=File
NewBuildMacroDialog.label.type.path.dir=Directory
NewBuildMacroDialog.label.type.path.file.list=File List
NewBuildMacroDialog.label.type.path.dir.list=Directory List
NewBuildMacroDialog.label.type.path.any=Path
NewBuildMacroDialog.label.type.path.any.list=Path List
NewBuildMacroDialog.label.browse=Browse
NewBuildMacroDialog.label.title.new=Define a New Build Variable
NewBuildMacroDialog.label.title.edit=Edit Existing Build Variable
NewBuildMacroDialog.label.list.title=Value of Build Variable
NewBuildMacroDialog.label.status.cannot.create=The "{0}" Variable can not be created by user

# ------------Resource Configuration Selection Page
ResourceBuildPropertyPage.label.ActiveResource=Active Resource configuration
ResourceBuildPropertyPage.label.ResourceSettings=Resource Configuration settings
ResourceBuildPropertyPage.label.Configuration=Configuration:
ResourceBuildPropertyPage.label.ExcludeCheckBox= Exclude from build
ResourceBuildPropertyPage.selection.configuration.all=All configurations
ResourceBuildPropertyPage.label.ToolTree=Tools
ResourceBuildPropertyPage.label.ToolOptions=Options
ResourceBuildPropertyPage.label.NotMBSFile=The project is closed or the file is not contained within a Managed Make project.
ResourceBuildPropertyPage.error.version_low=The Managed Make project settings for this project are not available.
ResourceBuildPropertyPage.tip.excludecheck=Exclude the file from building in the selected configuration
ResourceBuildPropertyPage.tip.config=Select the configuration to edit
ResourceBuildPropertyPage.unsupported.proj=The project support is not installed on the system
ResourceBuildPropertyPage.unsupported.config=The configuration support is not installed on the system
ResourceBuildPropertyPage.config.notselected=No configurations selected
ResourceBuildPropertyPage.rc.non.build=Managed Build settings for this resource are not available
ResourceBuildPropertyPage.rc.generated=The selected resource is created by the buildfile generator

# ----------- Languages Page

CLanguagesPropertyPage.label.ActiveResource=Active Resource configuration
CLanguagesPropertyPage.label.ResourceSettings=Known languages
CLanguagesPropertyPage.label.ApplyToAllCheckBox=Apply changes to all configurations
CLanguagesPropertyPage.label.Configuration=Configuration:

# ----------- Resource Custom Build Step Block -----------
ResourceCustomBuildStepBlock.label.settings=Custom Build Steps
ResourceCustomBuildStepBlock.label.tool.group=Resource Custom Build Step
ResourceCustomBuildStepBlock.label.applicability=Custom Build Step Applicability
ResourceCustomBuildStepBlock.label.applicability.rule.before=Apply Custom Build Step Before Other Tools
ResourceCustomBuildStepBlock.label.applicability.rule.after=Apply Custom Build Step After Other Tools
ResourceCustomBuildStepBlock.label.applicability.rule.override=Apply Custom Build Step Overriding Other Tools
ResourceCustomBuildStepBlock.label.applicability.rule.disable=Disable Custom Build Step
ResourceCustomBuildStepBlock.label.input.filenames=Additional Input file name(s):
ResourceCustomBuildStepBlock.label.output.filenames=Output file name(s):
ResourceCustomBuildStepBlock.label.command.cmd=Command:
ResourceCustomBuildStepBlock.label.description.desc=Description:
ResourceCustomBuildStepBlock.tip.applicability=specifies how to apply the custom build step with respect to other resource configuration tools
ResourceCustomBuildStepBlock.tip.inputs=a semicolon separated list of additional input files for this build step.  Paths are interpreted as relative to the Project directory.
ResourceCustomBuildStepBlock.tip.outputs=a semicolon separated list of the output files produced by this build step.  Paths are interpreted as relative to the Build directory.
ResourceCustomBuildStepBlock.tip.command=a semicolon separated list of commands or a single command to be executed by this build step.  Paths are interpreted as relative to the Build directory.
ResourceCustomBuildStepBlock.tip.announcement=a message to be output in the build log upon execution of this build step
ResourceCustomBuildStepBlock.defaults.title=Reset Resource Custom Build Step
ResourceCustomBuildStepBlock.defaults.message=This action will reset the resource custom build step to the default settings.\n\nDo you want to proceed?

# ----------- Entry Dialog -----------
BrowseEntryDialog.error.Folder_name_invalid = Folder name invalid
BrowseEntryDialog.message.file = File:
BrowseEntryDialog.message.directory = Directory:
BrowseEntryDialog.file.title.add=Add file path
BrowseEntryDialog.dir.title.add=Add directory path
BrowseEntryDialog.file.title.edit=Edit file path
BrowseEntryDialog.dir.title.edit=Edit directory path
BrowseEntryDialog.wsp.dir.dlg.title=Folder selection
BrowseEntryDialog.wsp.file.dlg.title=File selection
BrowseEntryDialog.wsp.dir.dlg.msg=Select a folder from workspace:
BrowseEntryDialog.wsp.file.dlg.msg=Select a file from workspace:
BrowseEntryDialog.wsp.file.dlg.err=The selected element is not a file.
BrowseEntryDialog.wsp.dir.dlg.err=The selected element is not a directory.
BrowseEntryDialog.fs.dir.dlg.msg=Select a folder from file system:

# ----------- New Configuration -----------
NewConfiguration.label.name=Name:
NewConfiguration.label.description=Description:
NewConfiguration.label.group=Copy settings from
NewConfiguration.label.copy=Default configuration:
NewConfiguration.label.clone=Existing configuration:
NewConfiguration.label.showall=Show unsupported configurations 
NewConfiguration.label.warning=Note: The configuration name will be used as a directory name in the file system.  Please ensure that it is valid for your platform. 
NewConfiguration.error.duplicateName=A configuration named "{0}" already exists.
NewConfiguration.error.caseName=A configuration name that differs only in case to "{0}" exists.
NewConfiguration.error.invalidName=The name "{0}" is invalid.

# ----------- Rename Configuration -----------
RenameConfiguration.label.name=Name:
RenameConfiguration.label.description=Description:
RenameConfiguration.label.warning=Note: The configuration name will be used as a directory name in the file system.  Please ensure that it is valid for your platform. 
RenameConfiguration.error.duplicateName=A configuration named "{0}" already exists.
RenameConfiguration.error.caseName=A configuration name that differs only in case to "{0}" exists.
RenameConfiguration.error.invalidName=The name "{0}" is invalid.

# ----------- Target/Config management dialog -----------------
ManageConfig.label.configs=Manage Configurations
ManageConfig.label.rename=Rename...
ManageConfig.label.conversionTargetLabel=Tool chain conversion targets:
ManageConfig.label.convertTarget=Convert
ManageConfig.label.new.config.dialog=Create Configuration
ManageConfig.label.rename.config.dialog=Rename Configuration
ManageConfig.deletedialog.message=Are you sure you want to delete the "{0}" configuration?
ManageConfig.deletedialog.title=Confirm Delete
ManageConfig.tip.convert=Converts the selected configuration to use a tool chain selected in the conversion target list
ManageConfigDialog.1=Configuration
ManageConfigDialog.2=Description
ManageConfigDialog.3=Status
ManageConfigDialog.4=Set Active
ManageConfigDialog.5=Active
ManageConfigDialog.0=Manage Configurations
ManageConfig.tip.conversionTarget=A list of conversion targets available for the selected configuration 

# Toolchain Conversion Target confirmation Dialog
ConfigurationConvert.confirmdialog.message=Currently the "{0}" Configuration uses "{1}" toolchain. After conversion it will use "{2}" toolchain. Do you want to proceed?
ConfigurationConvert.confirmdialog.title=Confirm Configuration Conversion

# ----------- Build Property Common -----------
BuildPropertyCommon.label.title=Enter Value
BuildPropertyCommon.label.new=New...
BuildPropertyCommon.label.remove=Delete
BuildPropertyCommon.label.up=Up
BuildPropertyCommon.label.down=Down
BuildPropertyCommon.label.editVar=Edit...
BuildPropertyCommon.label.addVar=Add
BuildPropertyCommon.label.message=Value:
BuildPropertyCommon.label.browse=Browse...
BuildPropertyCommon.label.configs=Defined configurations:

# ----------- Field Editors -----------
Multiline.error.message=Please give correct input

# ----------- Build Tool Settings -----------
BuildToolSettingsPage.alloptions=All options:
BuildToolSettingsPage.tool.command=Command:
BuildToolSettingsPage.tool.commandLinePattern=Command\nline pattern:
BuildToolSettingsPage.tool.advancedSettings=Expert settings:

# ----------- File List Control -----------
FileListControl.add=Add...
FileListControl.delete=Delete
FileListControl.edit=Edit...
FileListControl.moveup=Move Up
FileListControl.movedown=Move Down
FileListControl.filedialog.title=Select File
FileListControl.dirdialog.title=Select Include Directory
FileListControl.dirdialog.desc=Select Include Paths
FileListControl.deletedialog.message=Are you sure you want to remove the selected entries?
FileListControl.deletedialog.title=Confirm Remove
FileListControl.editdialog.title=Edit Dialog
FileListControl.newdialog.title=New Dialog
FileListControl.button.workspace=Workspace...
FileListControl.button.fs=File system...
FileListControl.BrowseEntryDialog.wsp.dir.dlg.msg=Select one or more Workspace Folders
FileListControl.BrowseEntryDialog.wsp.file.dlg.msg=Select one or more Workspace Files
FileListControl.BrowseEntryDialog.wsp.file.dlg.err=One of the elements selected isn't a file
# ----------- Property Page ----------
MngMakeProjectPropertyPage.closedproject=Project Closed
MngMakeProjectPropertyPage.internalError=An Internal error has occurred. Please check error log.

# Copies from org.eclipse.ui.workbench
showAdvanced = &Advanced >>
hideAdvanced = << &Advanced
NewFolderDialog.folderNameEmpty = Folder name must be specified

# Project Conversion Dialog messages
ProjectConvert.confirmdialog.title=Confirm Project Conversion
ProjectConvert.confirmdialog.message=The selected project {0} will be converted. Do you want to proceed ?

ProjectConvert.conversionErrordialog.title=Project Conversion Error
ProjectConvert.conversionErrordialog.message=Error has occurred during the conversion of the project {0} .

ProjectConvert.noConverterErrordialog.title=Project Conversion Error
ProjectConvert.noConverterErrordialog.message=There are no converters available to convert the project {0} .

ProjectConvert.title=Project Converters for {0}
PropertyMultiCfgTab.0=* This functionality is experimental *
PropertyMultiCfgTab.1=Enable multiple configurations setting
PropertyMultiCfgTab.10=Add/remove/change affected elements, do not touch others
PropertyMultiCfgTab.11=Replace existing string lists with string list shown to user
PropertyMultiCfgTab.3=String List Display Mode
PropertyMultiCfgTab.4=Define how string lists from different configurations should be combined for display when lists are not equal:
PropertyMultiCfgTab.6=Show common elements (conjunction)
PropertyMultiCfgTab.7=Show all elements except doubles (disjunction)
PropertyMultiCfgTab.8=String List Write Mode
PropertyMultiCfgTab.9=Define how to save changes in string lists for different configurations:
PropertyPageDefsTab.0=Show "Manage Configurations..." button
PropertyPageDefsTab.1=Display "Data Hierarchy" tab
PropertyPageDefsTab.10=Display "Export Settings" tab
PropertyPageDefsTab.11=Save Property Dialog Bounds
PropertyPageDefsTab.12=Save size and position
PropertyPageDefsTab.13=Save size only
PropertyPageDefsTab.14=Do not save at all
PropertyPageDefsTab.15=Center dialogs on screen
PropertyPageDefsTab.16=Display tool option tips of "Tool Settings" tab at fixed location
PropertyPageDefsTab.4=Display "Tool Chain Editor" tab
PropertyPageDefsTab.5=Discovery Profiles Naming Rule
PropertyPageDefsTab.6=Show disc. page names if they are unique. Else names + profile IDs.
PropertyPageDefsTab.7=Show disc. page names if they are unique. Else show profile IDs.
PropertyPageDefsTab.8=Always show names + profile IDs
PropertyPageDefsTab.9=Always show profile IDs only
PropertyPageDefsTab.showIncludeFileTab=Display "Include Files" tab
ProjectConvert.convertersList=Converters List

ScannerConfigOptionsDialog.title=Discovery Options
ScannerConfigOptionsDialog.description=Set the scanner configuration discovery options for this project
ScannerConfigOptionsDialog.scGroup.label=Automated discovery of paths and symbols
ScannerConfigOptionsDialog.scGroup.enabled.button=Automate discovery of paths and symbols
ScannerConfigOptionsDialog.scGroup.problemReporting.enabled.button=Report path detection problems
ScannerConfigOptionsDialog.scGroup.selectedProfile.combo=Discovery profile:
ScannerConfigOptionsDialog.profile.group.label=Discovery profile options
ScannerConfigOptionsDialog.boProvider.parser.enabled.button=Enable build output scanner info discovery
ScannerConfigOptionsDialog.boProvider.open.label=Load build output from file
ScannerConfigOptionsDialog.boProvider.browse.button=Browse...
ScannerConfigOptionsDialog.boProvider.browse.openFileDialog=Build output file:
ScannerConfigOptionsDialog.boProvider.load.button=Load
ScannerConfigOptionsDialog.siProvider.parser.enabled.button=Enable generate scanner info command
ScannerConfigOptionsDialog.siProvider.command.label=Compiler invocation command  
ScannerConfigOptionsDialog.siProvider.browse.button=Browse...
ScannerConfigOptionsDialog.siProvider.browse.runCommandDialog='gcc' command:
ScannerConfigOptionsDialog.siProvider.command.errorMessage=Must enter compiler invocation command
ScannerConfigOptionsDialog.apply.progressMessage=Setting scanner configuration discovery options...
ScannerConfigOptionsDialog.common.variables.button=Variables...

ScannerConfigOptionsDialog.unsavedchanges.title=Setting C/C++ Make Project Discovery Options 
ScannerConfigOptionsDialog.unsavedchanges.message=The C/C++ Make Project Discovery Options property page contains unsaved modifications. Do you want to save changes so that other discovery related settings can be updated?
ScannerConfigOptionsDialog.unsavedchanges.button.save=Apply
ScannerConfigOptionsDialog.unsavedchanges.button.cancel=Cancel

ScannerConfigOptionsDialog.error.title=Error Setting Project Discovery options
ScannerConfigOptionsDialog.error.message=An error occurred while setting the project discovery options

# --- DiscoveredScannerConfigurationContainerPage ---
DiscoveredScannerConfigurationContainerPage.title=Edit container
DiscoveredScannerConfigurationContainerPage.description=Manage discovered scanner configuration
DiscoveredScannerConfigurationContainerPage.list.title=Discovered include paths and symbol definitions
DiscoveredScannerConfigurationContainerPage.initialization.error.message=Error initializing Discovered paths container

# new strings

AbstractCPropertyTab.0=Select build variable
AbstractCPropertyTab.1=Variables...
AbstractCPropertyTab.2=This tab is not supported in multi-configuration mode
AbstractPage.0=Unknown element selected
AbstractPage.1=This file has no properties to display
AbstractPage.12=Manage Configurations...
AbstractPage.11=setProjectDescription: 
AbstractPage.10=Cannot create resource configuration for 
AbstractPage.13=Cannot load 
AbstractPage.14=Cannot create page: 
AbstractPage.15=element not initialized.
AbstractPage.16=[ Active ]
AbstractPage.2=This project is not a CDT project
AbstractPage.3=Error while accessing new configuration. <Apply> cannot work. Use <OK>.
AbstractPage.4=[ All configurations ]
AbstractPage.5=[ Multiple configurations...]
AbstractPage.6=Configuration: 
AbstractPage.7=Exclude resource from build
AbstractPage.8=Cannot apply
AbstractPage.9=Internal error
AbstractPage.rebuildIndex.question=Changes to the include search paths or defined symbols will not be reflected in the index until it is rebuilt. Do you wish to rebuild it now?

AbstractLangsListTab.0=Show built-in values
AbstractLangsListTab.1=Languages
AbstractLangsListTab.2=Export
AbstractLangsListTab.3=\ [exp]
AbstractLangsListTab.4=Unexport
AbstractPrefPage.0=\ Preference settings will be applied to new projects \n only when there were no toolchains selected.
AbstractExportTab.0=[All]
AbstractExportTab.1=[List]
AbstractExportTab.2=Create...
AbstractExportTab.3=Edit...
CLocationTab.0=Filter (empty)
CLocationTab.1=Filter (
CLocationTab.2=, 
CLocationTab.3=)
CLocationTab.4=Add Folder...
CLocationTab.5=Link Folder...
CLocationTab.6=Edit Filter...
CLocationTab.7=Delete
CLocationTab.8=<root folder>
CLocationSourceTab.0=Source folders on build path:
CLocationOutputTab.0=Output folders on build path:
EnvDialog.0=Name:
EnvDialog.1=Value:
EnvDialog.2=Variables
EnvDialog.3=Add to all configurations
EnvironmentTab.0=Environment variables to set
EnvironmentTab.1=Variable
EnvironmentTab.10=New variable
EnvironmentTab.11=Edit variable
EnvironmentTab.12=Variables list
EnvironmentTab.13=Add to all configurations
EnvironmentTab.14=Select variables
EnvironmentTab.15=Current String List DISPLAY mode. Double-click to change
EnvironmentTab.16=Origin
EnvironmentTab.17=CONJ.
EnvironmentTab.18=DISJ.
EnvironmentTab.19=DISPL mode: 
EnvironmentTab.2=Value
EnvironmentTab.20=<UNDEFINED> 
EnvironmentTab.21=REPLACE
EnvironmentTab.22=WRITE mode: 
EnvironmentTab.23=Current String List WRITE mode. Double-click to change
EnvironmentTab.24=MODIFY
EnvironmentTab.3=Append variables to native environment
EnvironmentTab.4=Replace native environment with specified one
EnvironmentTab.5=Add...
EnvironmentTab.6=Select...
EnvironmentTab.7=Edit...
EnvironmentTab.8=Delete
EnvironmentTab.9=Undefine
IncludeTab.0=Include directories
IncludeTab.1=Add directory path
IncludeTab.2=Change directory path
IncludeFileTab.0=Include files
IncludeFileTab.1=Add include file
IncludeFileTab.2=Change include file
IncludeDialog.0=Directory:
IncludeDialog.1=File:
IncludeDialog.2=Add to all configurations
IncludeDialog.3=Add to all languages
LanguagesTab.0=Content type
LanguagesTab.1=Language
LibraryPathTab.1=Add...
LibraryPathTab.2=Edit...
LibraryTab.1=Add...
LibraryTab.2=Edit...
RefsTab.0=Expand All
RefsTab.2=Collapse All
RefsTab.3=Active
RefsTab.4=Projects list
SymbolTab.0=Symbol
SymbolTab.1=Value
SymbolTab.2=Add symbol
SymbolTab.3=Change symbol
ExpDialog.0=To all configurations
ExpDialog.1=Save to: 
ExpDialog.2=Languages
ExpDialog.3=Content types
ExpDialog.4=Is a workspace path
ExpDialog.5=Apply to all
ExpDialog.6=Name:
ExpDialog.7=Value:
ExpDialog.8=Name cannot be empty.
ExpDialog.9=The same name already exists.
ExpDialog.10=Value cannot be empty.
ConfigMultiSelectionDialog.0=Select configurations
ConfigMultiSelectionDialog.1=At least 2 configurations should be selected
SymbolDialog.0=Name:
SymbolDialog.1=Value:
ConfigDescriptionTab.0=Project Description
ConfigDescriptionTab.1=Configuration Description
ConfigDescriptionTab.2=Resource Description
BinaryParsTab.0=Binary parser:
ErrorParsTab.error.NonEmptyName=Specify non empty name
ErrorParsTab.error.NonUniqueID=Error parser ID is not unique, specify different name
ErrorParsTab.error.OnApplyingSettings=Error applying Error Parser Tab settings
ErrorParsTab.error.OnRestoring=Error restoring default Error Parser Tab settings
ErrorParsTab.error.NonAccessibleID=[ Not accessible id={0} ]
ErrorParsTab.error.IllegalCharacter=Special character ''{0}'' is not allowed
ErrorParsTab.label.EnterName=Enter name of new error parser:
ErrorParsTab.label.DefaultRegexErrorParserName=Regex Error Parser
ErrorParsTab.message.ConfirmReset=Are you sure you want to delete all customized error parsers?
ErrorParsTab.title.Add=Add Regex Error Parser
ErrorParsTab.title.ConfirmReset=Confirm Resetting Error Parsers
ErrorParsTab.title.Edit=Edit Regex Error Parser name
StructureTreeTab.0=Level: 
StructureTreeTab.1=Maximal tree nesting
StructureTreeTab.2=Long
StructureTreeTab.3=String
StructureTreeTab.4=Object to view: 
StructureTreeTab.5=Expand all
StructureTreeTab.6=Expand level...
StructureTreeTab.7=Collapse all
StructureTreeTab.8=Property
StructureTreeTab.9=Value
StructureTreeTab.10=Class
StructureTreeTab.11=Wait...
PrefPage_PropertyPage.0=These settings will affect behavior of CDT property pages

CConfigWizardPage.0=Select Configurations
CConfigWizardPage.1=Select platforms and configurations you wish to deploy on
CConfigWizardPage.4=Project type:
CConfigWizardPage.5=Toolchains:
CConfigWizardPage.6=Configurations: 
CConfigWizardPage.7=Select all
CConfigWizardPage.8=Deselect all
CConfigWizardPage.9=Edit properties after project creation
CConfigWizardPage.10=At least one configuration should be available. Project cannot be created.
CConfigWizardPage.11=At least one configuration should be selected. Please check needed configurations.
CConfigWizardPage.12=Use "Advanced settings" button to edit project's properties.\n\nAdditional configurations can be added after project creation.\nUse "Manage configurations" buttons either on toolbar or on property pages. 
CConfigWizardPage.13=Advanced settings...

CMainWizardPage.0=Project type:
CMainWizardPage.1=Show project types and toolchains only if they are supported on the platform
CMainWizardPage.10=A project with that name already exists in the workspace.
CMainWizardPage.2=Edit properties after project creation
CMainWizardPage.3=No project types available. Project cannot be created
CMainWizardPage.5=Cannot create ICProjectTypeHandler: 
CMainWizardPage.6=File with specified name already exists.
CMainWizardPage.7=Directory with specified name already exists.
CMainWizardPage.8=Project name:
CMainWizardPage.9=Project name is empty

ProjectContentsArea.0=Browse...
ProjectContentsArea.1=Use default location
ProjectContentsArea.2=Location:
ProjectContentsArea.3=Invalid location path
ProjectContentsArea.4=Project contents directory must be specified
ProjectContentsArea.5=Select directory:
ProjectContentsArea.6=Project path should be absolute
ProjectContentsArea.7=Project path is not valid
ProjectContentsArea.8=Cannot create given path
ProjectContentsArea.9=File with given name already exists
StdProjectTypeHandler.0=-- Other Toolchain --
StdProjectTypeHandler.2=Default
StdProjectTypeHandler.3=creation Make project: IBuilder is null

CDTConfigWizardPage.0=Select configurations
CDTCommonProjectWizard.0=Old project will be overridden
CDTCommonProjectWizard.1=Existing project settings will be overridden.\nImport feature can be used instead to preserve old settings.\nOK to override ?
CDTCommonProjectWizard.creatingProject=Creating project
NewModelProjectWizard.0=CDT Project
NewModelProjectWizard.1=Create CDT project of selected type
NewModelProjectWizard.2=C++ Project
NewModelProjectWizard.3=Create C++ project of selected type
NewModelProjectWizard.4=C Project
NewModelProjectWizard.5=Create C project of selected type
BuildVarListDialog_0=Type:
BuildVarListDialog_1=Text list
BuildVarListDialog_2=File path
BuildVarListDialog_3=List of File paths
BuildVarListDialog_4=Directory path
BuildVarListDialog_5=List of Directory paths
BuildVarListDialog_6=Any path
BuildVarListDialog_7=List of any paths
BuildVarListDialog_8=Text
BuildVarListDialog.0=<not available>
BuildVarListDialog.1=Build variables
StringVariableSelectionDialog_message=&Choose a variable (? = any character, * = any string):
StringVariableSelectionDialog_columnDescription=&Variable Description:
NewCfgDialog.0=
NewCfgDialog.1=
NewCfgDialog.2=Cannot create new configuration
NewCfgDialog.3=-- not selected --
NewCfgDialog.4=Import from projects
NewCfgDialog.5=Import predefined
CDTMainWizardPage.0=Project name cannot contain '\#' symbol
CDTMainWizardPage.1=Project category is selected. Expand the category and select a concrete project type.
CProjectWizard.0=Add C Project Nature
CCProjectWizard.0=Add CC Project Nature
WorkingSetConfigAction.21=Building project 
WorkingSetConfigAction.22=Build error
IncludeTab.export=Export Settings...
IncludeTab.import=Import Settings...