Skip to main content
summaryrefslogtreecommitdiffstats
path: root/cross
AgeCommit message (Collapse)AuthorFilesLines
8 days[releng] Bump version to 9.9.0Jonah Graham6-6/+6
Change-Id: I6641e51a8bfdb44fa5c646d97debf2bf814c107a
2019-05-31[releng] bump version numbers according to version number guidelinesJonah Graham1-1/+1
See https://wiki.eclipse.org/CDT/policy#Version_Numbering Change-Id: I54004437fa7a52b7c2b341fa9cb2d0683daf8962
2019-03-13Bug 545335: Fixed serial port is not getting saved issueKondal Kolipaka2-1/+2
Change-Id: I6e0c3392a5bacbac8c4741adab58a234f8efae54 Signed-off-by: Kondal Kolipaka <kondal.kolipaka@gmail.com>
2019-03-01[releng] Bump version to 9.8.0Jonah Graham6-6/+6
Change-Id: I3861d4c5d0eecaf9dd370f269a655e666b60561a
2019-02-07Bug 509263 - Fix warnings for missing enablement expression on start-upSimeon Andreev2-1/+3
This change adds empty enablement expressions where they are missing, in order to prevent start-up warnings such as: Enablement expression is missing for config provider for org.eclipse.cdt.debug.core.coreBuildDescriptorType Change-Id: Id7f2b6149230ddde24764772c5b67ff5eef28b65 Signed-off-by: Simeon Andreev <simeon.danailov.andreev@gmail.com>
2018-12-10[releng] Bump version to 9.7.0Jonah Graham6-6/+6
Change-Id: Icaa0b6acf73e3a19e0d102fa8ae784e631d8743a
2018-11-24Bug 540373: Update the compiler warnings/ignoresJonah Graham4-4/+4
The previous alignment of all the warnings/ignores led to too many warnings that weren't there before. This commit relaxes them a bit. The core/org.eclipse.cdt.core/.settings/org.eclipse.jdt.core.prefs is still the "master" copy, with releng/scripts/check_code_cleanliness.sh containing the exceptions that apply to test plug-ins. Change-Id: Ibd4e31ade0b42b31e7cbe5a94f06c6fc15183a56
2018-11-23Bug 540373: Cleanup: Remove trailing whitespace in properties filesJonah Graham8-27/+27
Command used: # Remove space at eol in comments find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/^(#.*)[ \t]+$/\1/' {} + # Remove space at eol in blank lines find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/^[ \t]+$//' {} + # Replace escaped spaces at eol with unicode find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/([^\\])\\ $/\1\\u0020/' {} + # Replace unescaped spaces at eol with unicode find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/([^\\]) $/\1\\u0020/' {} + # Replace escaped tabs at eol with unicode find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/([^\\])\\\t$/\1\\u0009/' {} + # Replace unescaped tabs at eol with unicode find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/([^\\])\t$/\1\\u0009/' {} + # Stage all changes git add -A . # trim any remaining whitespace and then identify and fixup # manually # Only dsf/org.eclipse.cdt.dsf.ui/src/org/eclipse/cdt/dsf/debug/ui/viewmodel/MessagesForDebugVM.properties # needed this due to missing newline at end of the file find . ! -path "./.git/*" -type f -name *.properties -exec sed -i -E 's/[ \t]+$//' {} + Change-Id: I858f16891fe001f4f7e62d5a4f904146e891cd39
2018-11-22Bug 540373: Remove '(non-Javadoc)' commentsJonah Graham2-16/+0
These were inserted in the past automatically by Eclipse but newer tooling makes them redundant. These were removed by doing a global find/replace on *.java files using the following regular expression: \t/\*\n\t \* \(non-Javadoc\)[^/]*/\n Change-Id: I59d3248020f10934fde1dda5b5a31e20bb188e19
2018-11-22Bug 540373: Cleanup: Add missing annotationsJonah Graham7-0/+37
This was done by selecting all projects in Eclipse then Source -> Clean Up... -> choosing: - Add missing Annotations - and selecting all three types: - @Override - @Override on interface methods - @Deprecated and completing the wizard Change-Id: I5d367dacb04327107f25e147edc08efc4eb1c2fe
2018-11-22Bug 540373: Cleanup: Format & Remove trailing whitespaceJonah Graham16-477/+370
This was done by selecting all projects in Eclipse then Source -> Clean Up... -> choosing: - Format source code - Remove trailing white spaces on all lines and completing the wizard Change-Id: I63685372c6bcc67719bcf145123bcb72e5b00394
2018-11-22Bug 540373: Standard .settings auto appliedJonah Graham20-15/+3199
The releng/scripts/apply_jdt_prefs_to_all_projects.sh was run to copy standard settings to all other projects. Change-Id: I4436c947d7f0142f56b709e661379c3eb54f666b
2018-11-22Bug 540371: Update to EPLv2 using releng/scripts/change_to_eplv2.shJonah Graham54-237/+427
Change-Id: Ifbb1d5af2a00bd5634dea200320e8c4303ffca6c
2018-11-22Bug 540371: normalize files before applying EPLv2Jonah Graham2-6/+8
Change-Id: I8bfd427bba1df18579d6d5e58ad1e5d704485050
2018-11-20Bug 540373: Normalize newlines with .gitattributesJonah Graham33-929/+929
There is also a new script to verify completeness of .gitattributes: releng/scripts/verify_gitattributes.sh Change-Id: I2ce270852ab54b66b6c474a6ec94203fe5bba78b
2018-10-30Bug 540610 - Add Automatic-Module-Name headerKarsten Thoms4-0/+4
Change-Id: Ia990b24469751050dd9ec8f9b5550804816308b3 Signed-off-by: Karsten Thoms <karsten.thoms@itemis.de>
2018-10-23Bug 540367 - Increment version numbersWilliam Riley4-4/+4
Change-Id: I4a355170a7075f0a98ba3c1a5131c235c89b07d2
2018-06-13Bug 533399 - Workaround RemoteResourceBrowser layout issueChin Huat Ang1-0/+16
Ensure that the remote connection has been opened before showing RemoteResourceBrowser dialog so that the dialog's layout would not depend on the state of the connection. Change-Id: Iec70c243b75723de418e55a1f07cd8e9804400b6 Signed-off-by: Chin Huat Ang <chin.huat.ang@intel.com>
2018-06-05[releng] Bump version to 9.6.0Jonah Graham6-6/+6
Change-Id: I1618eaeab14b421155af733a73e36f6e37ea0b85
2018-02-13[releng] Bump version to 9.5.0Jonah Graham6-8/+6
Change-Id: Ie342f02f7aae633f41a7ab7d39c21e056793a04a
2018-02-06Bug 530635: Add ability to do "set remotetimeout" via UIJonah Graham3-3/+73
Change-Id: Iaeaea1e8656d85cb854a5b27f5f212fa37a3159d
2017-12-02Fix version of serial launch feature.Doug Schaefer1-1/+1
Change-Id: I850f72c9b094f732e384596c05ed30485bd2fceb (cherry picked from commit fdd005c96f173fb25360933cd40857da36a078df)
2017-12-02Fix up license field for serial launch feature.Doug Schaefer2-5/+11
Change-Id: I26534c7748186428af908111dc712cd0c0d09708 (cherry picked from commit c546572ac94bddb1b25388698382d875f6985948)
2017-12-01Fixes for ESP32.CDT_9_4_branchDoug Schaefer1-0/+8
In the new toolchain wizard, the select button wasn't hooked up. So I turned it off. Also, we had no build settings tab on the serial launch. Change-Id: I811f579334889085f49d298878589109c5e4a228
2017-11-21Releng fixes, ensuring legal files are there. Removing projects.Doug Schaefer7-6/+71
Removed the empty debug.core.tests project. Also removed the utils-feature and remote-feature projects since these shouldn't be features. Change-Id: Ib5d297c626de5328e3421a1fc9346330d9907750
2017-11-13Serial Flash Target and Launch. Clean up Generic Launch.Doug Schaefer30-0/+804
Adds target, launch classes, and launch bar support for targets intended to upload their code to flash using a Serial Port. The port is co-ordinated with the Serial Terminal so that the terminal is paused during the upload. Also cleaned up the Generic Launch so it's not using the External Tools launch which has a number of UX issues. This simplifies the settings and gives us more control. And it's made reusable for the Serial Flash launch. Change-Id: I31e9970243fbf1cf22d027bbdb892fde104dbefe
2017-10-06Add UI tests plugin for CMake. Fix a couple of bugs it found.Doug Schaefer1-7/+0
Also restructures the pom.xmls to put the modules in the top level so we can order them to have the test plugins build after them. Change-Id: I2f0e4ebd252791fb8844cdf0f635d574946207aa
2017-09-19Reinstate commit 709689b36e1a1ec573d81a02a7e882faabca58e5Jeff Johnston2-0/+36
- This commit is still needed to allow CDT Sonar job to run so that features that have same name as plug-ins will be distinguishable by Sonar job Change-Id: I3eb3f3cf94d5f4338d72c5d19d0baf2f7506c388
2017-09-11Update feature versions to CDT 9.4.Doug Schaefer4-40/+4
Also remove remaining pom.xmls for feature projects. Change-Id: I78d6335f92d70ad2699b8a25801ff72d2935aefe
2017-04-18Bring back some pom.xml from featuresMarc-Andre Laperle2-0/+36
Those features have the exact same id and groupid than a plugin which throws off SonarQube with: "Two modules have the same id: 'org.eclipse.cdt:org.eclipse.cdt.util'. Each module must have a unique id." In the pom.xml, we can specify a different groupid which resolves the problem. Alternatively, the feature id could have been changed but that would break upgrades. Change-Id: Ib2912ad854a3af431b96f89a6ead1bcb6d06ba60 Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
2017-03-15Bug 511801 - Remote launch: validate that the remote exec file is absoluteSimon Marchi3-18/+37
From my experience, bad things happen if the user specifies a non-absolute path in the box labeled "Remote Absolute File Path for C/C++ Application". This patch adds a validation to the tab to make sure that the path is a valid absolute POSIX path. This assumes that we do not support remote launching on Windows targets, and therefore do not need to specify paths such as "C:\foo\bar.exe". Change-Id: I20367078ff20179f0515272afee17d0986940309 Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
2017-03-15Remote debug: Use the IFileStore interface to force the file executableSimon Marchi1-25/+10
Instead of calling "chmod +x" by hand, use IFileStore.putInfo to set the file attributes. Since we already use the IFileStore API to copy the file, it makes sense (and it's cleaner) to use it to set the executable attribute as well. In most cases, it wouldn't be needed to make the file executable, since it should already be on the host filesystem and IFileStore.copy transfers the attributes. However, it's still good to force it executable in case it's not already for some reason. Change-Id: I4c86e36265962781d4541aaceeb40b502248f674 Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
2017-02-27Convert RemoteHelper.remoteFileDownload to use SubMonitorSimon Marchi1-6/+10
This patch converts RemoteHelper.remoteFileDownload to use SubMonitor instead of the deprecated SubProgressMonitor. The remoteFileDownload operation consists of two sub-operations, to which I assigned the following weigth: - Download the file to the target (95%) - Change the permissions (5%) Ref: http://www.eclipse.org/articles/Article-Progress-Monitors/article.html Change-Id: I8336f8e853e811a4350f1a63ba64934121ace5d8 Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
2017-02-13releng: Make use of Tycho POM-less functionalityMarc-Andre Laperle5-70/+22
This removes a lot of pom.xml from the source tree. This is using the "POM-less" Tycho functionality. See https://wiki.eclipse.org/Tycho/Release_Notes/0.24#POM-less_Tycho_builds One advantage of this is that you do not need to update the version in the pom.xml when you change it in the MANIFEST.MF because the pom.xml is automatically generated. This also reduces a lot of the duplicated information and pom.xml repetition. - Maven 3.3 and up is required. - Only eclipse-plugins and eclipse-features can be pom-less. Repositories, target and others still have pom.xml. - New parent poms are added because a parent is necessary directly one level above the plug-in/feature that will have its pom generated - Some test plug-ins had to be renamed .test -> .tests because it's required so that it detects that it's a test plug-in - Some suites were renamed so that they all use the same consistent name "AutomatedIntegrationSuite" - Profiles were added for the more common test configurations. They are activated by the presence of simple .properties files that only serve to activate the correct profile. The profiles: - One for UI tests (UI present and start in UI thread) - One for SWTBot tests (UI present and do not start in UI thread) Other test plug-ins that are too different are kept intact and still have a pom.xml - Fragments are kept intact since they all have different target platform configurations Change-Id: I9d73380eb766f547830c552daf08053a30b1845c Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
2017-01-25Auto-generate source features using tycho.Marc Khouzam5-227/+0
This commit removes explicit source features and has tycho create them automatically, along with all other source features that were not previously defined. The logic to auto-generate is in the root pom.xml For all pre-existing source feature, the name presented to the user has been changed to use the default name used by Tycho, which is "Developer Resources". This will provide a more standard user-experience with respect to other source features built by Tycho. Existing SDK features are kept for backwards compatibility. All the names of the auto-generated source features that replace an existing source feature have stayed the same except for the 'testsrunner' feature; for that one name change, a p2.inf file is added to allow upgrading from the old named feature to the new named feature. Change-Id: Ie632e798c93898fd828f88df4983fc43e2749d22
2016-11-15Update version to 9.3.0Marc Khouzam7-9/+9
Change-Id: Ic953ccc5d38ff3661ca44de21ed8c4b7dad5b246
2016-11-14Update version to 9.2.0Marc Khouzam7-9/+9
Change-Id: I36ad4218b20b8ea70584c89f5be45c757bf4c714
2016-11-04Bug 507078 - o.e.cdt.launch.remote.source should be in separate feature.Roland Grunberg2-7/+33
The org.eclipse.cdt.launch.remote feature is the only non-source, non-sdk feature to include the corresponding source plugin for it's main provided plugin. An org.eclipse.cdt.launch.remote source-feature should be created to provide the source plugin. Change-Id: I2e396270f0d19f023e75452c316da0e4eda495b1 Signed-off-by: Roland Grunberg <rgrunber@redhat.com>
2016-08-17Update version to 9.1.0Marc Khouzam7-9/+9
This commit used the script releng/scripts/ChangeFeaturesVersion.sh Change-Id: I8274a6e8dd5c0f1e450f07952e138b265a441a62
2016-06-30Remove old .cvsignore filesMarc Khouzam1-1/+0
Change-Id: Ia66de47055a15d94c0aa45d1198f0a9e78d82ad0
2016-06-22Move the rest of the CDT plugins to java 8Marc Khouzam3-5/+5
This change was generated using the script: releng/scripts/ChangeJavaVersion.sh Change-Id: I2ad96dc682a5acb8529c3edec40de279c331b5a4
2016-06-09bug 452356 - using o.e.remote: issues with remote browse dialogMarc Dumais1-1/+8
This patch addresses an issue in the "Select Remote C/C++ Application File" browse dialog: - The remote browse dialog's selected file or directory is still used in the launch configuration, even if the user cancels the browse dialog Change-Id: Ib535254d681a349b2aadfe91adfc73d633a16e90
2016-05-25Move o.e.cdt.launch.remote to Java 8Alvaro Sanchez-Leon3-6/+5
The parent commit e6bec45 is using Java 8 API, moving the BREE to this level Change-Id: I348cdf601bba5b733003a404ecbba8901f7085bd
2016-05-24Bug 452356 - C/C++ remote launch uses o.e.remote - wait for file permission ↵Alvaro Sanchez-Leon1-2/+26
change When uploading a file to a remote system, the file permissions are updated, however the process taking care of it may not have completed this task before the application tries to use it. This change forces the calling thread to wait for Max 1 sec for it to complete, If the process task takes longer an exception is thrown so the application can provide a meaningful message to the user. A second fix is provided in: execCmdInRemoteShell So this method now makes sure that the remote connection is opened before executing commands over the remote shell. Change-Id: Ibe8bd2709e1b1f446e1f74aa8a3df424ac7fa650
2016-04-29Bug 452356 - C/C++ remote launch uses o.e.remote - explicit dependency at ↵Alvaro Sanchez-Leon3-4/+4
feature level Adding an explicit dependency to o.e.remote at feature level, so the dependecies are loaded at the installation of the launch remote feature Change-Id: I90f6bd29cd1b6f2efc46e241520621bbd256ffef
2016-04-29Remove Solaris Sparc supportMarc-Andre Laperle1-10/+0
Solaris Sparc support was removed in SWT therefore it cannot be supported by CDT anymore. Change-Id: Ic40f55632023fd77fd164d3e48b5ca06835c3a31 Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
2016-04-28Bug 452356 - C/C++ remote launch uses o.e.remoteWainer dos Santos Moschetta14-560/+568
Replaced RSE with o.e.remote on C/C++ remote run and debug launchers. Change-Id: I308b81ad90ae8e838557d7b2afb53efb1cdf7ff9 Signed-off-by: Wainer dos Santos Moschetta <wainersm@linux.vnet.ibm.com>
2016-04-19Bug 491984 - Replace .equals("") with .isEmpty()Alex Blewitt3-6/+6
In many cases a String's empty status is tested with `.equals("")`. However, Java 1.6 added `.isEmpty()` which can be more efficient since it compares the internal length parameter only for testing. Replace code using the `.isEmpty()` variant instead. Some tests for `"".equals(expr)` can be replaced with `expr.isEmpty()` where it is already known that the `expr` is not null; however, these have to be reviewed on a case-by-case basis. Change-Id: I3c6af4d8b7638e757435914ac76cb3a67899a5fd Signed-off-by: Alex Blewitt <alex.blewitt@gmail.com>
2016-04-02Make remote launch tab definition readableMarc Khouzam1-43/+40
Change-Id: I098091ea75d3839754c6a354a732a408b8258138
2016-03-18Bug 484900: Cleanup remote launch after CDI cleanupMarc Khouzam3-782/+2
API Breaking changes: - The old RemoteCMainTab.java was removed. RemoteCDSFMainTab should be used. Move Remote Run launch to use RemoteCDSFMainTab Remove plugin.xml definition of the tabs associated with the removed CDI Remote debug launch. Change-Id: Ie71497aa745295cc696b2679aa3047d9895d2481

Back to the top